Tamiya TRF416 / TRF416WE / TRF416X
Tech Adept
iTrader: (5)
Join Date: Apr 2012
Location: Everett WA in the Summer Mesa AZ in the Winter
Posts: 128
Trader Rating: 5 (100%+)
I have just started running a 416X I bought used with the thin Exotek chassis in a Spec GT class on asphalt. Class limit is 21.5 motor, blinky ESC and no less than 5.5 FDR. I'm at 5.56. I'm running a Novak Ballistic with maximum motor timing and a MMP ESC with a Venom 5000 25C Lipo.
Car handles wonderfully but I'm getting my butt kicked on speed. The car has a Spec R gear transmission in the rear.
Can I still use the 2.055 internal ratio for calculating FDR with the Spec R setup?
Car handles wonderfully but I'm getting my butt kicked on speed. The car has a Spec R gear transmission in the rear.
Can I still use the 2.055 internal ratio for calculating FDR with the Spec R setup?
Tech Champion
iTrader: (94)
I have just started running a 416X I bought used with the thin Exotek chassis in a Spec GT class on asphalt. Class limit is 21.5 motor, blinky ESC and no less than 5.5 FDR. I'm at 5.56. I'm running a Novak Ballistic with maximum motor timing and a MMP ESC with a Venom 5000 25C Lipo.
Car handles wonderfully but I'm getting my butt kicked on speed. The car has a Spec R gear transmission in the rear.
Can I still use the 2.055 internal ratio for calculating FDR with the Spec R setup?
Car handles wonderfully but I'm getting my butt kicked on speed. The car has a Spec R gear transmission in the rear.
Can I still use the 2.055 internal ratio for calculating FDR with the Spec R setup?
Tech Rookie
Hi there guys,
Found this forum whilst googling for a 416 pinion. I've recently brought a 416 roller but struggling to find a pinion that meshes well. What pitch do the spurs have? I have a 70t spur and looking to put a BL system in and 50/50 drift, so was looking at like 17/18/19t pinion. Any help???
Much appreciated
Found this forum whilst googling for a 416 pinion. I've recently brought a 416 roller but struggling to find a pinion that meshes well. What pitch do the spurs have? I have a 70t spur and looking to put a BL system in and 50/50 drift, so was looking at like 17/18/19t pinion. Any help???
Much appreciated
Tech Adept
iTrader: (5)
Join Date: Apr 2012
Location: Everett WA in the Summer Mesa AZ in the Winter
Posts: 128
Trader Rating: 5 (100%+)
Sorry for the delayed response. I hate it when people do that.
Anyway, yes I was getting badly out motored on the straights. I put a Hacker Skalar 21.5 in and it took care of the problem. No gear change or anything else.
Thinking the Novak 21.5 needs some care and feeding. Interestingly I use the same motor with an 8.5 stator in another car and it gets up and goes. Only a little slower than 7.5s in the class.
Anyway, yes I was getting badly out motored on the straights. I put a Hacker Skalar 21.5 in and it took care of the problem. No gear change or anything else.
Thinking the Novak 21.5 needs some care and feeding. Interestingly I use the same motor with an 8.5 stator in another car and it gets up and goes. Only a little slower than 7.5s in the class.
Tech Champion
iTrader: (94)
Hi there guys,
Found this forum whilst googling for a 416 pinion. I've recently brought a 416 roller but struggling to find a pinion that meshes well. What pitch do the spurs have? I have a 70t spur and looking to put a BL system in and 50/50 drift, so was looking at like 17/18/19t pinion. Any help???
Much appreciated
Found this forum whilst googling for a 416 pinion. I've recently brought a 416 roller but struggling to find a pinion that meshes well. What pitch do the spurs have? I have a 70t spur and looking to put a BL system in and 50/50 drift, so was looking at like 17/18/19t pinion. Any help???
Much appreciated
Tech Champion
iTrader: (94)
Sorry for the delayed response. I hate it when people do that.
Anyway, yes I was getting badly out motored on the straights. I put a Hacker Skalar 21.5 in and it took care of the problem. No gear change or anything else.
Thinking the Novak 21.5 needs some care and feeding. Interestingly I use the same motor with an 8.5 stator in another car and it gets up and goes. Only a little slower than 7.5s in the class.
Anyway, yes I was getting badly out motored on the straights. I put a Hacker Skalar 21.5 in and it took care of the problem. No gear change or anything else.
Thinking the Novak 21.5 needs some care and feeding. Interestingly I use the same motor with an 8.5 stator in another car and it gets up and goes. Only a little slower than 7.5s in the class.
Are there any other belts that work with the 416X? The one from the manual, 54143 seems to be pretty hard to find and was wondering if it was replaced with a different part #.
Tech Fanatic
iTrader: (22)
Tech Champion
iTrader: (94)
http://www.tamiyausa.com/items/radio...-(front)-51343
If you prefer the low friction, then it is in stock at amp draw
http://www.ampdraw.com/product.php?u...roductid=12524
If you are not in the US, then ebay / rcmart-dinball has it in stock as well
http://www.ebay.com/itm/Tamiya-54143...-/130546326058
Need a motor heat sink. What's tamiyas number for one. I need it ASAP
Thanks
Thanks
Tech Champion
iTrader: (94)
part number 9400448 (google as Tamiya 9400448) and you will see the image
http://www.tamiyausa.com/items/radio...-58371-9400448
Also 9400169
http://www.tamiyausa.com/items/radio...-58331-9400169
Part number 9415723
http://www.tamiyausa.com/items/radio...-58299-9415723
Tech Master
iTrader: (26)
anyone know if the 417/417x/417/v5 chassis will bolt on to a 416?
Tech Champion
iTrader: (94)
Tech Master
iTrader: (26)
parts still readily available for this car?
Tech Champion
iTrader: (94)
Yes they are. Sus arms are same ones used on 417. New ones from 418 will fit as well. Belts and pulleys are still in production