LOSI123

iTrader: (63)

I have a Premium Power 4700mah Li-Po

i was wondering if anyone knows where i can get the plug to suit the white balancing port that hangs off the pack it has 3 pins and looks like ones ive seen on motherboards of PC's before?


i will upload a photo shortly

thanks.....

pdungadamo

the plug should come with the balancer. otherwise tower has them

http://www2.towerhobbies.com/cgi-bin...?&I=LXNGC4&P=V

LOSI123

iTrader: (63)

Picture.

LOSI123

iTrader: (63)

does not look like it will fit?

tpczx6

iTrader: (3)

do you have a balancer??


if not what kind of charger do you have?
you can buy an Equinox inline balancer. check with your LHS on the airplane and Heli side of the shop they should have some to look over.

if you need more info click on mikes in my tag line and give us a call we can get you hook up.

LOSI123

iTrader: (63)

i dont have a balancer, but i dont need one, as i have an ice, which can be set to one cell and as long as you can correctly work out the conections, then i will charge each cell then it will be balanced.




all i want is the plug to fit it with some wires hanging off...

MrUnlimited

some charger has a balancer. I have a e-station charger which has a balancer. Nice sister you have (avatar)

gezer2u

iTrader: (4)

Scroll down to the middle of the page.

http://www.commonsenserc.com/index.php?cPath=32_39

JevUK

How are you getting on with this pack?

If they are working well they are the bargain of the century for 54$!

padailey

iTrader: (11)

So has anyone figured out what kind of balancing plug PP uses. PolyQuest/Hyperion or Equinox or something else. I hate all these different balancing plugs and so few places tell you what kind they use! Grrrrr!

JevUK

They look like PQ plugs.

If a pack does not have the plug you need on it it's easy to covert them. 1 pin is the + one is the - and one is the connection between the 2 cells. Use a tester to find out which is which, always worth checking before you hook up a new type of pack to existing equipment anyway.