Serpent to 1/10th EP Touring Kit S400
#421
I believe right around like yellow is 16 and orange is around 19. That might not be the exact but somewhere close.
Bryan
Thanks I am extremely happy with the car....
Bryan
Thanks I am extremely happy with the car....
#422
Yesterday I ran at a different track than I did on Saturday. The car was awesome I made some changes do to the track being extremely hot. The changes from the stock set up was:
Front droop=2.5mm over ride height
Rear droop=2.9mm over ride height
1mm shim under the inner ball stud front and rear.
40wt oil
The only thing else I did was when the track was cool was lean the front shocks in one hole to get a little bit more steering. But when the track was hot I stood them back up to the stock setting cause the car would loosin up..
Bryan
Front droop=2.5mm over ride height
Rear droop=2.9mm over ride height
1mm shim under the inner ball stud front and rear.
40wt oil
The only thing else I did was when the track was cool was lean the front shocks in one hole to get a little bit more steering. But when the track was hot I stood them back up to the stock setting cause the car would loosin up..
Bryan
#423
Tech Elite
iTrader: (26)
try this set up lilb ! ( i ran 3.5 brushless but it should be good in stock and 19t)
front
4 degrees caster
.5 degree toe out
4.5 mm ride height
6.0 mm droop (droop gauge)
1.5 degree camber
1.5mm shims under both front and rear pivot blocks
3.0mm shim under inner camber link (long camber link)
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
outter bottom shock mount
red sway bar
rear
3.0 degrees toe in
6.0 mm droop ( droop gauge)
1.5 degree camber
1.5 mm shim under both front and rear pivot blocks
no shim under camber link on rear hub(mount in middle hole)
1.5 mm shim under inner cambelink
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
middle bottom shock mount
yellow sway bar
front
4 degrees caster
.5 degree toe out
4.5 mm ride height
6.0 mm droop (droop gauge)
1.5 degree camber
1.5mm shims under both front and rear pivot blocks
3.0mm shim under inner camber link (long camber link)
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
outter bottom shock mount
red sway bar
rear
3.0 degrees toe in
6.0 mm droop ( droop gauge)
1.5 degree camber
1.5 mm shim under both front and rear pivot blocks
no shim under camber link on rear hub(mount in middle hole)
1.5 mm shim under inner cambelink
30wt shock oil
shock lenght 66.5mm
2 hole piston
20% rebound
Tamiya Yellow spring
shock mount 3rd hole from the top
middle bottom shock mount
yellow sway bar
#425
Tech Elite
#427
Tech Elite
iTrader: (26)
all the off road nitro fumes are getting to me...
well, how is the car? Mine was working really well on its time out...much better than my Mi3...it took me a few days to ge the Mi3 working nicely, and even so, the S400 already is faster and easier to drive...I just hope its durable...
well, how is the car? Mine was working really well on its time out...much better than my Mi3...it took me a few days to ge the Mi3 working nicely, and even so, the S400 already is faster and easier to drive...I just hope its durable...
#428
Tech Elite
iTrader: (26)
Marcos J: What rate are the Tamiya yellow springs you're using? I trying to order some...are these it?: http://www2.towerhobbies.com/cgi-bin...?&I=LXFAD6&P=7
#429
Super Moderator
iTrader: (239)
Marcos J: What rate are the Tamiya yellow springs you're using? I trying to order some...are these it?: http://www2.towerhobbies.com/cgi-bin...?&I=LXFAD6&P=7
http://www2.towerhobbies.com/cgi-bin...&I=LXWB01&P=SM
tamiya yellow long springs are like 13 lbs
#430
Marcos J: What rate are the Tamiya yellow springs you're using? I trying to order some...are these it?: http://www2.towerhobbies.com/cgi-bin...?&I=LXFAD6&P=7
Bryan
#433
Tech Adept
#434
Tech Elite
iTrader: (26)
Serpents Yellow is rated 1.4, which Xray say is 14lbs on their yellow springs...Serpent Orange are 1.7, which Xray says is about 17lbs on theirs?...Xray and serpent have very similar ways of doing things so the spring rats might be the same...I just need to know for sure...any Serpent 710/720 drivers know what spring rates the Serpent yellow and orange?
#435
Serpents Yellow is rated 1.4, which Xray say is 14lbs on their yellow springs...Serpent Orange are 1.7, which Xray says is about 17lbs on theirs?...Xray and serpent have very similar ways of doing things so the spring rats might be the same...I just need to know for sure...any Serpent 710/720 drivers know what spring rates the Serpent yellow and orange?
WHITE 13
YELLOW 16
ORANGE 19.5
RED 23.5
PINK 28
BLUE 33
PURPLE 39
GREEN 45.5
GREY 51.5
BLACK 57