Serpent to 1/10th EP Touring Kit S400
#2238
Tech Regular
#2239
R/C Tech Elite Member
iTrader: (47)
Thanks guys!
The hotel lobby has a couple computers so I'll be on a few times through the week. Checked out the track yesterday, it is all high speed sections going into kinks and hairpins, not technical at all, so whoever has the fastest motor and best batts is going to have a good shot. The only scary part on the track in my opinion is the sweeper, a 140' straight leading into a fairly narrow sweeper with 3" pvc track borders on the inside, and a wood fence on the outside is going to be the end for a lot of cars this week, that is going to be the turn to watch out for I'd say.
The hotel lobby has a couple computers so I'll be on a few times through the week. Checked out the track yesterday, it is all high speed sections going into kinks and hairpins, not technical at all, so whoever has the fastest motor and best batts is going to have a good shot. The only scary part on the track in my opinion is the sweeper, a 140' straight leading into a fairly narrow sweeper with 3" pvc track borders on the inside, and a wood fence on the outside is going to be the end for a lot of cars this week, that is going to be the turn to watch out for I'd say.
#2240
The only scary part on the track in my opinion is the sweeper, a 140' straight leading into a fairly narrow sweeper with 3" pvc track borders on the inside, and a wood fence on the outside is going to be the end for a lot of cars this week, that is going to be the turn to watch out for I'd say.
nah, seriously, good luck sir.
#2241
which online shop have gear diff instock ?
Thanks !
Thanks !
#2243
When mounting TRF shocks on the S400, what lower mount/ball end do you use? I just got a new set of these shocks and the included ones are pretty short so the shock is nearly 10mm shorter than the RCC shocks i had mounted, would you use the standard Serpent ball ends instead?
#2244
#2246
Tech Initiate
Hi all i have just brought a S400 here in the UK. Just after a bit of advice!
Rather than trawling through 70 odd pages could someone outline what you have done to the car, ie any changes you have made!
Also any setups which could come in handy!
[email protected]
Thanks
Paul
Rather than trawling through 70 odd pages could someone outline what you have done to the car, ie any changes you have made!
Also any setups which could come in handy!
[email protected]
Thanks
Paul
#2248
Tech Champion
iTrader: (17)
When mounting TRF shocks on the S400, what lower mount/ball end do you use? I just got a new set of these shocks and the included ones are pretty short so the shock is nearly 10mm shorter than the RCC shocks i had mounted, would you use the standard Serpent ball ends instead?
#2249
R/C Tech Elite Member
iTrader: (47)
Just a quick update from the nats, qualifying is over and Billy and I both got our cars into the mains. Billy is qualified 3'rd with me in 5'th in modified, and I'm qualified 4'th in 10.5 as well. Both of our cars have been doing great the last couple days, I had a ton of bad luck in 10.5 which probably cost me a better starting spot, but that's racing.
#2250
Tech Elite
iTrader: (26)
Just a quick update from the nats, qualifying is over and Billy and I both got our cars into the mains. Billy is qualified 3'rd with me in 5'th in modified, and I'm qualified 4'th in 10.5 as well. Both of our cars have been doing great the last couple days, I had a ton of bad luck in 10.5 which probably cost me a better starting spot, but that's racing.
How's the traction? How are the control tires holding up?