Quick help please: TC3 hex sizes
04-17-2007, 05:11 PM
#1
Quick help please: TC3 hex sizes
About to buy some hex drivers online and can't remember the sizes! I need to know the size for:
The screws underneath the chassis (the countersunk ones)
The main screws (like the ones that hold the shock tower on)
The grub screw for pinion gears.
I think its .050", 3/32" and 5/64" but I just need to check.
Any fast advice would be much appreciated as I need to get the order in sharpish.
The screws underneath the chassis (the countersunk ones)
The main screws (like the ones that hold the shock tower on)
The grub screw for pinion gears.
I think its .050", 3/32" and 5/64" but I just need to check.
Any fast advice would be much appreciated as I need to get the order in sharpish.
04-17-2007, 05:37 PM
#2
The flathead screws are 1/16"
Socket head/ droop screws 3/32"
5/64" for the diff screws
Most pinions are 1.5mm or 1/16"
Socket head/ droop screws 3/32"
5/64" for the diff screws
Most pinions are 1.5mm or 1/16"
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
