Originally Posted by nikkiesteban
tips on how to smooth-out the cell slots?
I will smooth-out the cell slots to fit sub-c batteries.
pics will be much better. thanks
File the slots on a 45deg angle on the top side of the lower deck. The angled part on my slots ended up about 2-2.5mm wide. I'd post pics but my digital camera doesnt do close shots too well and wouldnt show you much!
Originally Posted by kavadni
Has anyone fitted a bitty design Lipo Tray to an MS. If so which one.
Pretty sure you've seen the Bitty Design tray mounted in my car now :P
For those that are curious, model # BD-LBT50E02 (or just Type 2) that fits the TRF chassis (along with a few others like XRAY, CORALLY).
The TRF tray moves the lipo out to the side ~15mm.
The tray adds 46gms to your chassis.
Used mine for the first time last night in my car. I got pushed into a barrel roll by another car and rolled about 7 times and the tray did not come loose and the lipo did not move.
This is using the taping method described as "Solution 1" on the page here...
I'm sure solution 2 would be ok as well, but #1 felt safer for the first use of both the tray and a lipo in my chassis.