X-Ray T2 007
#1
X-Ray T2 007
Hello Guys,
I have a question on the T2 007 setup. I am on an Ashphalt track which
has high grip and some fast sweeping corners and some tight corners. What
i would like to know if you help me on is the Chassis Flex Setting. Which of
the three setting would you recommend stiff, medium or soft setting? I was
thinking maybe a medium setting but not sure. Could you help me out here.
Thanks.
I have a question on the T2 007 setup. I am on an Ashphalt track which
has high grip and some fast sweeping corners and some tight corners. What
i would like to know if you help me on is the Chassis Flex Setting. Which of
the three setting would you recommend stiff, medium or soft setting? I was
thinking maybe a medium setting but not sure. Could you help me out here.
Thanks.
#2
i dont race asphalt but the concept is the same as carpet , the more the grip the stiffer the chassis you want ,i'll subject to start with medium setting and take it from there , if you see to much chassi flex like robbing or anything else
stiff up the shocks for more info on setups you ck teamxray.com , good luck and happy easter
stiff up the shocks for more info on setups you ck teamxray.com , good luck and happy easter
#3
brushless gearing
I just got a Novak GTB and 13.5 for my T2 007. With the 116 tooth spur and 33 pinion there isn't much room to go bigger. What size spur are most people running with the brushless? I run rubber on carpet. Thanks.
#4
i use a 100spur (prs) and the highest you could go with that its like 38 or 39, i got a 37 now and it is fast
#5
sorry forgot i run foams , but you want to get betwen 36mm and 39mm rollout
#6
Originally Posted by skink
Hello Guys,
I have a question on the T2 007 setup. I am on an Ashphalt track which
has high grip and some fast sweeping corners and some tight corners. What
i would like to know if you help me on is the Chassis Flex Setting. Which of
the three setting would you recommend stiff, medium or soft setting? I was
thinking maybe a medium setting but not sure. Could you help me out here.
Thanks.
I have a question on the T2 007 setup. I am on an Ashphalt track which
has high grip and some fast sweeping corners and some tight corners. What
i would like to know if you help me on is the Chassis Flex Setting. Which of
the three setting would you recommend stiff, medium or soft setting? I was
thinking maybe a medium setting but not sure. Could you help me out here.
Thanks.
BTW,
I suggest using the existing Xray T2'007 thread for anymore questions. That is the thread that all of the XRAY drivers monitor the most and the forum moderators tend to frown upon duplicate threads.