dark_luna

Thx guys

Running 2050KV on 6S

garen

iTrader: (7)

The P81 has the option of running a single battery inside the radio tray. I have driven and seen others with 1 battery on each side and no problems with the batteries getting damaged.

John St.Amant

iTrader: (1)

Yet. Pardon my pessimism but, it will happen. I like the inboard batteries for that reason. That and a better polar moment.

DanielD

iTrader: (16)

Looks great Dark!!....can't wait til the Serpent electric GT releases its gonna be pretty sweet.

ChampRC

iTrader: (3)

Don't know if they've been posted already: http://www.amainhobbies.com/advanced...=gtp2e&x=0&y=0.

OFNA Ultra GTP-2e 1/8th Electric 4WD On Road Sedan
OFNA DM-One Spec E 1/8th Electric 4WD On Road Sedan
Traxxas XO-1 1/7th Electric 4WD On Road Sedan

DanielD

iTrader: (16)

What were you talking about?

DS Motorsport

iTrader: (2)

For the last few months I've been working on an 1/8 electric.

I'm basing my conversion on a Capricorn LAB-C801. For the first prototype/mule I'm making a simple conversion. This is basically to test the electronics and the driveline. When all of this is reliable and able to cope with the forces I will start producing a proper, purpose build 1/8 electric.

The electronics I'm using are specifically designed for 1/8 onroad and will have the power and reliability to match a nitro version and in the end it will even surpass the nitro version.

jayjay283

I don't see belts handling a CC and 2650 on 6's, I look forward to being proven wrong. Looks really cool

MAD916

Belts work fine on our E-MRX4's using 6s 1550kv and 1700kv.... our experince has show anything up in the 2000kv or higher on 6S just melts and blows stuff up when running at race pace. we are getting 8min plus run time on 5200mah 6S Rocket fast and good blalnce of weight and runtime.

M7H

To keep the thread alive, here some videos of me driving the S966e, on 4S lipo, with 2200kv Hobbywing motor / Xerun 150a ESC....

http://www.youtube.com/watch?v=HvBqwz4uHdA

http://www.youtube.com/watch?v=nz3W9X-RC84

SuperEk4

iTrader: (32)

Very fast what's the gearing? Both cars 966e?

M7H

At both videos I drive 24 pinion, 44 spur, and the internal ratio of the car is 50/22=2.273. rear tyres where 72mm diameter. this gives a roll-out of 54mm, topspeed is 90kmh.
With 26 pinion and fresh 76mm tyres, the car reaches 100kmh
Only then the lipo's dumped I think, and reached a temp of 60 celcius!

What I would really like from Hobbywing, is less punch.....
The traction is so high in on-road, that I can do with less punch, to gain runtime. I now drive with 5100mAh cells, and runtime is 5 minutes, but with lipo cut-off at 2.8V, which empty's the lipo's to 3.1V open voltage (not under load).


In the first video I'm driving together with somebody who is practising for the 10th scale worlds of 2012 which are run on our track.
In the 2nd video, the silver car is a 200WGT, and just a bit slower then me, but we were having a lot of fun, and he was constantly blocking me, so in the end, I had enough of it and made a perfect move to give him a little push which rolled him over.... that's how we do that when we are having a laugh!....

SuperEk4

iTrader: (32)

Lol, I thought my 2200kv is too slow so I brought 6s Lipo damn. Btw where can I buy old model Lola shell for my mrx2? My steering servo is standing upright type not lying down.

M7H

I think with low profile steering servo, it will fit.....
Don't know for sure, but it's worth the try!

madmikepags

iTrader: (5)

Are you guys really only getting 7-8 minutes of runtime w 6s? On 4s 6000's w a tekin RX8 and a 2650 motor I get at least 13 minutes on a race track, 9-10 in a parking lot running full throttle almost all the run. My top speed is 70mph and has more punch then you couls imagine. This is w/ a Mugen MRX4X single speed and the gearing is 59/21