CEFX Racing Thread.
#603
Tech Master
iTrader: (1)
dennis - We don't make a complete oval kit. We only sell the Lithium as a conversion kit so the customer can use their old hubs, shocks and front end on our car. Adam used some of his old KSG blue stuff on the car and I use IRS black hubs on my car.
drover - Just e-mail for now. I will post when the new site is up.
Jeremy - The Novak went well but Frank Calandra was very tough this weekend at 360. I was lucky that he had a case of the "taps" in the main and allowed me to hang on for the win. I am making some changes for the Birds that will hopefully make me a little quicker. We will see how it goes.
drover - Just e-mail for now. I will post when the new site is up.
Jeremy - The Novak went well but Frank Calandra was very tough this weekend at 360. I was lucky that he had a case of the "taps" in the main and allowed me to hang on for the win. I am making some changes for the Birds that will hopefully make me a little quicker. We will see how it goes.
#604
hey josh I just bought a 12 scale evo 2 from a guy on ebay 2 weeks ago and im having a problem the ride height adjusters dont fit the green pod plates I had to hack the plastic adjusters up to get them in but still the axel doesn't slide in and out smooth and had slot of binding can I still get green pod plates for the car from you? If so can you shoot me a price plus what's the cost for the upgrade to the 12 scale brushless conversion you sell thanks speedpro
#605
Tech Master
iTrader: (1)
speedpro1 - You can order anything from [email protected]. Just shoot an e-mail over. The Phoenix conversion kit sells for $87.50. Not sure off hand the price on the motor plates. Usually, the ride height adjusters fit either good or a little loose. Check the inner step. Sometimes, this is a little under size and hits on the smaller diameter of the ride height adjuster. Just take an xacto or small grinding bit to take a little off. Just look at the plate from the back side when putting in the ride height adjuster and you can tell where it's touching/binding.
#607
Tech Adept
Were can I see some pictures of the cefx racing team from snowbirds 2009?
#608
Tech Adept
cefx racing drivers team
Hi guys you know any other drivers except Josh who race with cefx in Snowbirds.
#609
Tech Regular
I know Mike Skeen does and I'm pretty sure Eric Anderson. From the sounds of it his Oval car has started to get popular but I can't remember who is running it at Snowbirds. I don't know if Josh took his laptop with him or not but I'm sure he is busy with onroad, Oval, Enduro, and he never can say no if someone asks him for help so he usually has a line of people standing behind him. Hopefully he isn't missing qualifiers because of it like he did at Gate Grand slam race.
#610
Tech Adept
I know Mike Skeen does and I'm pretty sure Eric Anderson. From the sounds of it his Oval car has started to get popular but I can't remember who is running it at Snowbirds. I don't know if Josh took his laptop with him or not but I'm sure he is busy with onroad, Oval, Enduro, and he never can say no if someone asks him for help so he usually has a line of people standing behind him. Hopefully he isn't missing qualifiers because of it like he did at Gate Grand slam race.
#611
Joe Trandell im pretty sure is running the car too.
#612
Phoenix 12 Link Car...
#613
Tech Adept
Thanks Andy.
The Josh run with the T Bar version or the Link one?
The Josh run with the T Bar version or the Link one?
#614
Snowbirdnational
Thank you! Mr.Josh Cyrul.
We feel your support glad. We used CEFX Phoenix thanks to your support and were able to go into A-FINAL in two classes. We thank for your having prepared the best car.
CEFX Phoenix which Josh Cyrul used is T-Bar car.
We feel your support glad. We used CEFX Phoenix thanks to your support and were able to go into A-FINAL in two classes. We thank for your having prepared the best car.
CEFX Phoenix which Josh Cyrul used is T-Bar car.
#615
Tech Adept
Hi I want to know the diference between the Phoenix and Phoenix J-spec.