TC3

this weekend i won the second race a our local track
i just won#t to share my setup with u.. :
condition medium grip aspahlt track, medium size.
front:
1,4x5,00 springs
oil: 30 piston: hpi #1 !!
1,6mm swaybar
a little kickup (used medium shim from the shimset)
outer most hole on the a-arm
second hole on the shocktower
1-1,5° camber

rear:
1,4x5,00 springs
oil: 30 piston: hpi #1 !!
1,2mm swaybar
a little kickup (used medium shim from the shimset)
2,5deg toe in
outer most hole on the a-arm
3rd hole on the shocktower
1-1,5° camber


take off cs 27 tires, medium blue take off insert.

usually i run the hpi #2 pistons and 40 wight oil, but on this track, lighter oil was defenetly faster !

now what are ur asphalt setups?

seaball

iTrader: (9)

dave, square castor blocks are 5*? where are the best places to get them?

has anyone tried the 3* castor blocks? i've got a feeling these will be better indoors than out. i should have mine mid week.

Dougnuts55

If any of you guys are planning on getting rid of your r3s can you email me [email protected]

JDM_DOHC_SiR

iTrader: (31)

The Square ones are very hard to come by since Square has discontinued the Barracuda line of products... I have seen a few in a couple of Tokyo shops....RC Champ and Pro-Shop Futaba they go for about 25$ and the colors that I have seen is Blue and Red only...
as far as the 3* C-hubs Have not used them ... My track is a very HIGH BITE one and I mostly use the 5* or 7* ones
-Dave

JDM_DOHC_SiR

iTrader: (31)

There will be a few good things going for the R3 this year... I think that the R3 used will be hard to find ... but you might keep a eyeout on the for sale section too
-Dave

Dougnuts55

I thought about gettin a r2 but from your talk an r3 seems teh better choice with that chassis. I want a lime green cuda .
Show pics a soon as possible

Doug

JDM_DOHC_SiR

iTrader: (31)

Either one will be a good pick R2 or R3.... they reall are very close in performance ..

But as for the Green Machine R3..... about 1 month untill thats all done
-Dave

Herminator

how'd you guess?
must of remembered I'm lanky

JDM_DOHC_SiR

iTrader: (31)

Yep..
-Dave

seaball

iTrader: (9)

dave, anyone - if you get a chance to pickup those 5* square castor blocks in the future, i would make it worth your while. by the way, can someone post a link to a pic of them. i am very curious.

- chris

JDM_DOHC_SiR

iTrader: (31)

Here ya go Square Barracuda Parts Page .

I think I can locate a set for you... PM me
-Dave

seaball

iTrader: (9)

what?

JDM_DOHC_SiR

iTrader: (31)

Thanks
Glad to be of Help
-Dave

pumpkinfish

iTrader: (4)

JDM_DOHC_SiR, does that site load slowly for you too? I found a link for the R2 and it didn't load!

JDM_DOHC_SiR

iTrader: (31)

Ya the Jet Hobby site is SUPER SLOW it will open up it just takes a while
-Dave