Originally posted by Merciless
You could try placing some small spacers under the rear wishbones mounting balls.This will alter the roll center the loosen the rear alittle .
I haven't tried to raise the roll center in the rear but I'm running with 0.8mm spacers in the front of the rear arms to add antidive.. and it gave me just the needed extra steering for our track. www.brc-racing.dk
I'm also running the 1 deg rear hubs and can only recomend them for everyone.. haven't tried the mid span arms since our track is fairly large (its just about a perfect 1:10 track)
You might also try to move the front dampers in a hole or 2 in the top.
Other surgestion would be to put a 1.4/5.75 spring in the rear.
Raise the rear 1-2 mm more than the front.
And don't do it all at once