5LikesAlex Racing Barracuda R2 & R3
07-28-2003, 06:30 PM
#2071
Originally posted by Randman
I dont want to point any fingers
I dont want to point any fingers
07-28-2003, 06:34 PM
#2074
Originally posted by Herminator
errr... how will it lower CG?
for the same final ride height it should actually raise the CG slightly
since everything is sitting on more graphite than before.
errr... how will it lower CG?
for the same final ride height it should actually raise the CG slightly
since everything is sitting on more graphite than before.
07-28-2003, 06:40 PM
#2075
Originally posted by Randman
Basically just because of more weight at the bottom of the car. This is why you dont run lead weights on the top of the shock towers
Basically just because of more weight at the bottom of the car. This is why you dont run lead weights on the top of the shock towers
trust me I know a bit about engineering
The extra thickness of the chassis will add more mass but it will all be above the top surface of the original chassis, so the CG of the chassis alone is higher for the thicker version, then you have the rest of the bits that sit on the chassis and they will also be sitting higher, only a fraction of a millimeter though, so they all raise the CG too.
Think of a 5cm cube and a shape thats 5cm wide in both directions but 6cm tall, which has the higher CG if they are made of the same material?
07-29-2003, 03:51 AM
#2077
Re: Re: Re: Web Special R2 PAL Mount
Originally posted by Randman
Is this the "Official Tease Randy Because His Web Edition Has A Stock Drivetrain" thread or what???
Is this the "Official Tease Randy Because His Web Edition Has A Stock Drivetrain" thread or what???
07-29-2003, 04:05 AM
#2078
were can you get the web edition from?
thanks
thanks
07-29-2003, 04:59 AM
#2079
Originally posted by GTMilenko
were can you get the web edition from?
thanks
were can you get the web edition from?
thanks
you might want to ask JDM_DOHC_SiR he might know where one is laying around
07-29-2003, 05:04 AM
#2081
they'll cost a pretty penny or two though 
07-29-2003, 05:22 AM
#2082
Alex Racing new Good`s
Alex Racing has now brought back there Alloy Lazer etched Setting boards ..again...
Last time I saw one new was 2 years ago...
they come custom etched with what you want on them and ...I think that you can get them in any color you want... I`ll find out more for you all by Friday
also they Have a Ti Lazer etched Zippo ligher if thats your gig`
Looks Like I`ll have to get the Orange one or a Nice Black one ...or Both!!!!
-Dave
Last time I saw one new was 2 years ago... they come custom etched with what you want on them and ...I think that you can get them in any color you want... I`ll find out more for you all by Friday
also they Have a Ti Lazer etched Zippo ligher if thats your gig`
Looks Like I`ll have to get the Orange one or a Nice Black one ...or Both!!!!
-Dave
07-29-2003, 06:04 AM
#2084
Re: Also /..
Originally posted by JDM_DOHC_SiR
New Stuff from Speedway PAL if you have a Orion LCS or Hakarunjer from ALEX RACING..
-Dave
New Stuff from Speedway PAL if you have a Orion LCS or Hakarunjer from ALEX RACING..
-Dave