Alex Racing Barracuda R2 & R3
#2041
Originally posted by JDM_DOHC_SiR
Chassis 3mm From what I have been told... but PAL will make it
thats it as far as I know
I`ll let you know if I finf out more
-Dave
Chassis 3mm From what I have been told... but PAL will make it
thats it as far as I know
I`ll let you know if I finf out more
-Dave
I'm wondering why PAL don't bother making a bumper brace or even Alex Racing, they must have some off cuts that would do the job fine and since they are so close to Yokomo they could get posts, if they fit.........
#2042
Originally posted by Ko Racer
who wont share
who wont share
#2043
Regional Moderator
Originally posted by JDM_DOHC_SiR
They only made like 1000 Pieces of each item from what I know...and ...it was the same way with the Pro3 parts a while back... thats OK Xenon and PAL still make some good alloy parts...you just have to got through Jet Hobby to get the alloy knuckles if you want them now
-Dave
They only made like 1000 Pieces of each item from what I know...and ...it was the same way with the Pro3 parts a while back... thats OK Xenon and PAL still make some good alloy parts...you just have to got through Jet Hobby to get the alloy knuckles if you want them now
-Dave
I went ahead got them instead of the allan head screw. they look better and are ti
#2044
Regional Moderator
Originally posted by Herminator
hmm, I wonder who he could be talking about too
hmm, I wonder who he could be talking about too
#2045
Tech Champion
iTrader: (31)
Originally posted by Herminator
a 3mm chassis would be nice, probably notfor indoor for me but outdoors next season
I'm wondering why PAL don't bother making a bumper brace or even Alex Racing, they must have some off cuts that would do the job fine and since they are so close to Yokomo they could get posts, if they fit.........
a 3mm chassis would be nice, probably notfor indoor for me but outdoors next season
I'm wondering why PAL don't bother making a bumper brace or even Alex Racing, they must have some off cuts that would do the job fine and since they are so close to Yokomo they could get posts, if they fit.........
...
#2047
Originally posted by JDM_DOHC_SiR
PAL makes a Bumper Brace...but you didn`t like the Lexan and the look that it looked like
...
PAL makes a Bumper Brace...but you didn`t like the Lexan and the look that it looked like
...
and no, I don't like the one, if anything it should be fish shaped
I think Steve has worn his fingers out, he can't keep up with the scrolling obviously, probably had the doctor advise him not to race much either
#2048
Tech Champion
iTrader: (31)
Originally posted by Herminator
I mean a graphite one, would look a lot nicer
and no, I don't like the one, if anything it should be fish shaped
I think Steve has worn his fingers out, he can't keep up with the scrolling obviously, probably had the doctor advise him not to race much either
I mean a graphite one, would look a lot nicer
and no, I don't like the one, if anything it should be fish shaped
I think Steve has worn his fingers out, he can't keep up with the scrolling obviously, probably had the doctor advise him not to race much either
Nope ...he`ll be able to catch up...it`s just the EBO Tray Guys have to read every little tid bit that they have it there thread j/k
-Dave
#2049
Regional Moderator
here is a picture of 2 of my boides i had done
#2050
Regional Moderator
one more
#2052
Regional Moderator
Originally posted by JDM_DOHC_SiR
They Look good.!!!!!
Did you get them from that Guy in HKG.??
-Dave
They Look good.!!!!!
Did you get them from that Guy in HKG.??
-Dave
#2053
Originally posted by Ko Racer
one more
one more
I'm going to have to work out a nice colour scheme like that for my shells, keeping them all the same certainly helps when racing, others know when to get out of the way quick
need to get an airbrush to go with my compressor too then build up a stock of paints, why does the list never end?
#2054
Tech Champion
iTrader: (31)
Originally posted by Herminator
very groovy
I'm going to have to work out a nice colour scheme like that for my shells, keeping them all the same certainly helps when racing, others know when to get out of the way quick
need to get an airbrush to go with my compressor too then build up a stock of paints, why does the list never end?
very groovy
I'm going to have to work out a nice colour scheme like that for my shells, keeping them all the same certainly helps when racing, others know when to get out of the way quick
need to get an airbrush to go with my compressor too then build up a stock of paints, why does the list never end?
-Dave
#2055
Originally posted by JDM_DOHC_SiR
Need a Air brush Hermi`... I have a Really nice Pasche VL dual action that needs a new home
-Dave
Need a Air brush Hermi`... I have a Really nice Pasche VL dual action that needs a new home
-Dave