Xray 007 chassis on T2????
12-26-2006, 03:57 PM
#2
Depending on carpet traction conditions, yes the stiffer 3.5mm chassis from the 007 can be an advantage. The only difference is the thickness compared to the original T2 chassis. The other option is a BMI carpet chassis kit which is 3mm, but made from a stiffer CF.
12-26-2006, 03:57 PM
#3
I dont belive that the 007 chassis will fit the regular T2. But the BMI t2 chassis is very nice. It comes with an upper deck, both shock towers, the rear upper deck, and a chassis.
12-26-2006, 03:59 PM
#4
Originally Posted by R.Dalnogare
I dont belive that the 007 chassis will fit the regular T2. But the BMI t2 chassis is very nice. It comes with an upper deck, both shock towers, the rear upper deck, and a chassis.
12-26-2006, 04:54 PM
#7
Originally Posted by XMSRacing
Why not sell your current T2 - pool in that money for the different chassis and a few extra dollars and buy a used 007? Then you get the new upper deck, chassis, bulkheads, etc.
12-26-2006, 05:08 PM
#8
Originally Posted by Anthony.L
Or just wait a couple more weeks, keep your T2 and buy the 007 conversion kit for WAY cheaper then buying a new one.
Right on!
12-26-2006, 06:27 PM
#9
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Originally Posted by DotyThe8ight
rcamericas site says all the parts from the 007 are interchangable with the t2.......
With the lower upper deck the servo saver assembly set won't fit, there are more also...
But X-ray is/has put something out there to convert the T2 to the Bond, James Bond X-ray race car....
12-26-2006, 07:15 PM
#10
The 007 chassis is a direct fit on the original T2 bulkheads and IMO is a worthwhile performance upgrade if running foams on medium to high traction carpet. However, the conversion kit will give you more bang for each buck.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
