LeoChan

NEW CARPET touring car use which tires best ?
& setting tip ?

Thanks !

Cole Trickle

Hmmm. It's the track that the tires should match. Carpet and carpet are two different things...

Simply use the same tire/insert combo as the fastest guys at the track.

Sigearhead

iTrader: (74)

First you have to tell us what car you have, then you have to tell us what carpet your run on, is it ozite? Then I might be able to start helping you out with some of your questions and setup tips. Your question is too broad, give us some more details

tufferwilde

Come on Favian.... he didn't give enough details?? Err.. nope...

Are you talking rubber tires?? If so try Sorex 20/24 with Yoke thin medium inserts

If you are talking about foams - try starting with plaids up front and purples in the rear


Wilde

peter_robinson

iTrader: (21)

go to your track nad ask the fast guys what they are running, and run those same tires.

peter

LeoChan

Thanks !
I'm now only use YOKOMO & Barracuda
but not use after have race have Mr.Massami ,
i'll use MR4-TC SD this car to race
8 mins race MOD
NEW CARPET no user tester , but same asia tamiya cup carpet,
only 1 day to test my car ,
before race tamiya driver say open is no traction , race day 1
morning same no traction after more , race day 2 final morning same is no traction .
INDOOR race with air cool

use which tires SOREX 20R & 24R ?
or YOKOMO 138M2 ,138B2 & 139B2 ?
which inner ?
use how many damper oil ?
full 4WD or Oneway ?
need use anti rollbar ?

& special how to setup can fit morning no traction & PM have small traction ?


Thankyou !!

JDM_DOHC_SiR

iTrader: (31)

Leo Chan'

I can give you a Good Starting point for a Barracuda for Carpet..

Tires.. I would use a Sorex 24R
Insert... HPI Red..
Oil..... Yokomo 550 rear and 600 front
Springs...HPI Gray 27mm or Pink 27mm
as for Oneways... I would use a front spool or Diff in the front..!!...dont use the the One way on Carpet with a Barracuda ....
Toe ...front 0 rear 2.1~2.5-
Camber -1 front -1 rear
also I would use a .5mm shim under the rear hex balls in the front and rear
..
Ride height and droop you will have to set one self.. (track buy track)


Hope this helps..
-Dave