I left the pictures full size as to not distort anything. But since they are full size they are too big to attach here.
I took it half way apart, there were a lot of things that could go wrong by taking it all the way apart.
After pulling it apart one thing became very apparent, no 30 amp per cell discharge.
Here are the pictures:
Outside of case with reference of what cells I am refering to in some of the pictures
Inside of case
Following directions (right, left, etc) are from bottom view of case.
Right side of board
Bottom left of board
Bottom right of board, under view.
Center of Board, connections to the heat sink
Bottom left of board, under view.
As far as I can tell the negatives are not connected to, well, anything. The only one that looks to be connected is the cell one negative. Another weird thing is there are 4 bottom connection pins and 3 pins on top. I think the bottom 4th pin is the voltage test.
Well thats all for now. See how this fuels the fire of conversation.