best way to charge 4200
 

Can anyone try my set-up step charging.
1. 3850 mAh 6A.
2. 3900 mAh 0.2A.
3. 4800 mAh 4.5A.
flex off
5 mV cut off
temp 50

I found that just like linear charging,same volt.but very good for take care my pack.temp cut off lower than linear charging.more mAh and lower IR.I just want some response. :sweat:

When I step charged my IB's I did not notice a big difference in performance, or battery temp. In fact, I have more problems getting my temp into that 125 to 130 temp range (farinheit), So I usually charge my IB 's linear at 6amp.

Best way to charge:

Connect the IB4200 pack directly to a 12v car battery. You will know the pack is charged when it starts to make a slight hissing sound. Immedietly disconnect the battery then.
:lol:

You tell him Smokey!
:lol: :lol:

anyone try this? :sweat: i'll test my step charging at the track tomorrow.