who makes this body ???
#1
Tech Initiate
Thread Starter
who makes this body ???
i would like to get a FORD pick-up truck body like this for my JRXS, does any body no which one this is ??, i looked around and seen that HPI has a few but not sure if it's a HPI body and what is the difference when running a 200mm body on a 190mm body car
and also this HPI body says, "This 200mm wide body is perfect for any wide electric Touring Car " so does that mean it would be fine on a 190mm car ?
any help/info would be great
thanks
#3
Tech Initiate
Thread Starter
thank you sir
but can you give me anymore info on the other ???'s
like 200mm on a 190mm car ?
"edit" was posting while you added some info
thanks again, i will look into that other body
but can you give me anymore info on the other ???'s
like 200mm on a 190mm car ?
"edit" was posting while you added some info
thanks again, i will look into that other body
#4
Tech Initiate
Thread Starter
i looked on the schumacher site but can't seem to get a pic of it
#5
I'm scratching my head on this one..
Why would you look on the schumacher site?
HPI sells body for $22 dollars. Looks like it is in stock.
Why would you look on the schumacher site?
HPI sells body for $22 dollars. Looks like it is in stock.
#6
Frewer F155 body on my TC3 (190mm) with 3mm offset wheels.
I've had this body for a few years now, I ran it on my Mission even
I've had this body for a few years now, I ran it on my Mission even
#7
Tech Initiate
Thread Starter
Originally Posted by butrflynlambie
I'm scratching my head on this one..
Why would you look on the schumacher site?
HPI sells body for $22 dollars. Looks like it is in stock.
Why would you look on the schumacher site?
HPI sells body for $22 dollars. Looks like it is in stock.
i looked on the schumacher site because he said you can get it from them and i have never seen that body he mentioned before and wanted to have a look and check it out and figured if they sold it they would have pics on there site and if i liked it better then maybe i would order it instead of the HPI one, i hope that is ok now that i explained myself to you
thanks for the help guys
#9
Tech Fanatic
iTrader: (28)
I run a 200mm HPI shell on my sprint 2 Drifter, which is 190mm , but I use 6mm offset speedway pal rims and they fill the guards perfectly,
or alternatively you could use wider hex adapters and thinner nuts to achieve some off set http://www.rcmart.com/catalog/produc...ducts_id=15006
or alternatively you could use wider hex adapters and thinner nuts to achieve some off set http://www.rcmart.com/catalog/produc...ducts_id=15006
#10
Tech Addict
Originally Posted by AdrianM
I will be the first to say the Schumacher Website is far from perfect.
Mr. Shep.
Protoform, HPI and Parma all have Ford 150 body. Try looking at the truck bodies in you LHS, you might find some that fit your car.
#11
Tech Initiate
Thread Starter
i guess i will be getting more than one
thanks for all the help guys
thanks for all the help guys