Team Losi JRXS Type-R
Company Representative
iTrader: (6)
Hey guys, just wanted to let you know that I have designed and made a new style setup wheel. The new design will not only give accurate camber readings, but will also allow for accurate tweak measurement. The wheel actually threads on the axle allowing it to center perfectly every time.
I made a handful of them with 8-32 threads with the Losi racers in mind, check out my RCRevealed thread in the Team and Company Discussions forums for more info.
Thanks,
Randy Caster
I made a handful of them with 8-32 threads with the Losi racers in mind, check out my RCRevealed thread in the Team and Company Discussions forums for more info.
Thanks,
Randy Caster
Tech Champion
iTrader: (100)
R/C Tech Elite Member
iTrader: (47)
Sorry, I should have noted that they were aimed at the JRXS (and even TC3) I have 4mm threads available for the Type R.
Just wanted to be sure that I had the older threads available for those that need them.
Just wanted to be sure that I had the older threads available for those that need them.
Hi,
Pablo Diablo: what else if not a FlyingFox spool? Our thanks for the great products!
MikeXray: I wish once I will know it!
Greg: I try to make the car faster in turns instead
Pablo Diablo: what else if not a FlyingFox spool? Our thanks for the great products!
MikeXray: I wish once I will know it!
Greg: I try to make the car faster in turns instead
Company Representative
iTrader: (6)
Hello Type-R fans,
Just a short news to let you know that my protege made the A-final in the ProStock class last weekend with the JRXS-R.
http://ets.redrc.net/
http://ets.redrc.net/wp-content/gall...tockgrid-9.jpg
The field included some big names like german and japanese stock national champions.
For Sunday the grip was very high, our shoes were sticking to the carpet during the ceremony...
Cheers,
Gergely
Just a short news to let you know that my protege made the A-final in the ProStock class last weekend with the JRXS-R.
http://ets.redrc.net/
http://ets.redrc.net/wp-content/gall...tockgrid-9.jpg
The field included some big names like german and japanese stock national champions.
For Sunday the grip was very high, our shoes were sticking to the carpet during the ceremony...
Cheers,
Gergely
any picture of the car without a body? or setup sheet to share?
thanks
thanks, i hadn't thought of the spur gear adapter having a motor selection advantage.
Tech Champion
iTrader: (73)
I am sure I've fit a 51/118 with the stock layshaft, I think I was running a novak at the time, this is with a drememeled pivot block though, you can take a good bit off, but you will lose the ability to flip it over, so I have one ready for each RC position
Company Representative
iTrader: (6)
or just dremeled that endbell off make it look like a trinity one
Tech Addict
iTrader: (2)
Tech Elite
iTrader: (20)
does anyone know if the flying fox lay shafts are in stock at skyrocket?
i would like to get one befor the KO race on dec. 12
i would like to get one befor the KO race on dec. 12
Company Representative
iTrader: (6)
Tech Master
iTrader: (3)
As far as I know Skyrocket is out and so am I. I will have my biggest batch of layshafts yet ready in 1 week. Flying Fox is stepping it up. I still can't believe how many Type R fans are out there.
Tech Regular
iTrader: (16)
Tech Elite
iTrader: (118)
I really need to get that 5th body post mounted. boy, does that body flex.
Tech Elite
iTrader: (118)
So... Which body is best for rubber? What are you guys running? Mazda6 or Speed6? LtcR?