YmeBP

iTrader: (32)

I use prs and kimbrough on mine.

maximebeauvais

iTrader: (7)

last night was my second night with a one way.

I was able to get a good setup and car was running fine.

HOWEVER, on one of the one way bearing, it was jamming all the time???? do it ever happen to you? should I contact losi? I'm pretty pist off about that. only 2 night of practice and bang...something wrong with my one way

YmeBP

iTrader: (32)

Mine doesn't even lock anymore (light usage), the outdrives just spin on both sides, and the bearings are non-replacable you have to buy a whole new tube which isn't cheap. It was a waste of 40$ in my opinion.

maximebeauvais

iTrader: (7)

wow, so should we contact losi?

this is not normal expecially for 2 night of practice!!!!

I will contact them over the weekend.

YmeBP

iTrader: (32)

I was contemplating calling them but honestly i don't even see myself usign the oneway, the spool works so well on most of my tracks although i am pissed that i have a useless device in my pitbox rumbling around.

Matt Howard

iTrader: (6)

oneways are fragile just by the design of them. If you hit stuff on power there's no where for that energy to go but to those little roller bearings inside of it.

GreaseMonkey

iTrader: (4)

Then why is it only the Losi one-ways that crap themselves?

RedRocketRacing

iTrader: (8)

Not so sure about that, I have not had a problem with mine, or the one that was in my JRXS. The worst ever....Mi2's. Would not make it thru one clean five minute run.

RedRocket

nitrobeast

iTrader: (46)

Hey guys

Im totally new to electric racing but not to nitro racing. I think ive made up my mind and getting the type r. The track i run at runs 10.5t. I need help on a decent electronic setup? Any help?

thanks

DENNIS STORTI

iTrader: (42)

i have run my losi one way for rubber indoor on asphalt an never had a problem with it yet

iixliltonyx33

iTrader: (7)

hey anyone know why the prs64108 spur won't fit on my prs adapter the wholes are off

jrr102486

iTrader: (8)

i run the airtronics 94758z servo(115oz/in at 0.06 transit), novak xbr speed control and the 17.5/13.5/10.5 novak motors. real dialed and fast as _____ with the maxamps 6000 lipo in it!

DENNIS STORTI

iTrader: (42)

i think they have 2 different types of gears with different bolt patterns

lidebt2

iTrader: (21)

need to use a Kimbrough

B-Master

hay guys i am after some setup help i am currenty running the tim hamm low grip setup (uploaded below) the setup worked alot better than the current setup i was running but its still a little slipery on the rear i changed a few things with the below setup which did help a little

1) 30lb springs front (better)
2) removed rear sway (better)
3) rear shocks brought in 1 space (better steering)

Problem = still alittle lose at the rear (on power out fo courners) and limited steering but changing shock angle (rear) helped lots

sorry if i have not explained this very well still very new to setting up cars properly i am running RP30's (i can use diffrent ones) and racing on a small asplult track in the UK weather is not to warm and running 13.5t brushless spedd passion setup

if anyone can give me some pointers on some things to try next time i race to solve the issues i have as the car still feels very loose on power comming out of the courners and i really could do with a bit more steering. i have set the speed controler to its lowest punch setting

any tips/pointers greatly appericated