RussB

it's fast

but seriously though, with all the heavy items on the centerline of the car, it's far easier for an average joe like myself to run considerably quicker times. with the revised a-arms the car is dang near bullet proof. it's a piece of cake to work on, it has the same easy diff access as the xray and corally. it looks uber cool with the dark green anodized aluminum. it's really adjustable.

Marcos.J

iTrader: (239)

i did all the digging i could and couldnt find one at the time i had to do what i could to make the main, dremel works wonders

Marcos.J

iTrader: (239)

has anybody tried the one-way on carpet?

J@UNE

iTrader: (1)

Yes, With a stock motor, I gain about 3 tenth per lap with it. It give the steering I was looking for. I'm now beating my T2's time and getting better and better

I also drive it without the rear post. It make it flex more and feel easier to drive.

BSchorr: I been running Xrays since the evo2... I had them all and still like them. I wanted something different for this season. I just started using Lipo. On the Xray, I had to put so much weight on the side to make it balanced... And since I will swich from Nimh to LIPO often (because my NIMH are faster) The losi make it so simple specially with the new steel tray. Swiching from BR to BL doesnt affect balancing. I know the Xray is one of the strongest car but the losi seem really close too. I broke a rear hub and a front C-hub in two severe crashs. Parts are inexpensive . Tighting the belt is way easiyer that the T2 as well. Anyways, I'm so happy with the car, I just got a second one!!!

The only things I can see that I don't really like about the car, Is
- Many different size of screws on the car (I have switch wrech often)
- I can't clean the Brushes and the cum between runs without taking out the motor. But does it really matter with BL getting so close to reality?

bigb11

iTrader: (59)

is anybody using fans? if so where did you find 20mmx20mm fans.

bigb11

iTrader: (59)

is there somewhere you can get setups for this car?

smojoe

iTrader: (2)

currently working on a mount for a single 30mm fan (like the novak GTB ones)

edit- would also like the setup for carpet rubber with one-way

bigb11

iTrader: (59)

what esc are you using with the orion brushless?

Marcos.J

iTrader: (239)

LRP TC Spec

J@UNE

iTrader: (1)

Here is my latest rubber/one-way setup.

Arn0

Some pages back, I posted this! Maybe that can help!!

hamster778

Hi there, i've been working on a page for the set-ups, as i couldn't find any either. You can find it here

http://team-spoon.bravehost.com/

Or here is another site full of set-ups

http://www.petitrc.com/view_news.php?id=4620

If any one wants their set-ups hosted, feel free to send them to me.

Cheers
Tim

bigb11

iTrader: (59)

THANKS guys, now I think i'll go to the losi side.

thewholeyearinn

I am planning on using the gtb speedo with an orion stock brushless motor, can anyone tell me if that will work with the jrxs type r? Also, can anyone tell me what is the best 190mm body for the jrxs type r in stock brushless foam tires?

thanks.

rraden

iTrader: (259)

Here's a pic of my JRXS-R with a GTB brushless and Lipo setup. Which is for sale here:

http://www.rctech.net/forum/showthread.php?t=177614