buzz06

I run my reciver on top of my servo and touch wood I have had no problems

tr1kstanc3

iTrader: (18)

I had the same issue as you. Here ya go.

chicmagnet

iTrader: (1)

i use a futaba hrs reciever and twister 2.1. everything is layed perfectly!! the diodes and caps are hidden!!

Jimmy Morris

iTrader: (9)

Mount the RX on its side parallel to the top deck pushed right up against it. Then the esc next to the RX.

Nexus

iTrader: (42)

tr1kstanc3.

Nice setup...I would probably move the on/off switch from the side of the car. A hit might turn it off or worse damage it. Then replacing it would be a pain.

Anyway just a thought. It looks real good otherwise.

tr1kstanc3

iTrader: (18)

Nexus,

Yeah thats a good point. But it looked so pretty and neat there

Drewdc90

iTrader: (3)

You could try turning it so it faces up.
I had someone crash into me in a final and hit the switch to the off postion,I ended up losing the final becuase of it. It was unlucky but these things happen.
Drew.

Scho

My T2....

Sarquis

Hello,
I have a Tekin g11 Pro, Spektrum Rec, Ko Propo Servo and everything fit well.
I have the Rec tucked under the top deck and the Speedo is standing on edge.
Sarquis