Tamiya TB Evolution V
#1592
Tech Regular
Nice one cheers
#1593
Tech Regular
What make of springs is everyone using outdoors on tarmac, tamiya, hara or other and what rating ???
#1594
Tech Master
iTrader: (5)
Do ya'll think the new TB03 center one-way set 54126 will fit into our Evo5's?!?
Quoted from the Tamiyausa site for the TB03:
When you accelerate, the one-way bearing locks in and creates traction. When you decelerate the one-way bearing freely moves reducing the chance of stalling which can be clearly noticed when cornering.
I have been looking through both instruction manuals but I don't personal own or know anyone that owns a TB03 so I can't directly compare the two side by side!
Quoted from the Tamiyausa site for the TB03:
When you accelerate, the one-way bearing locks in and creates traction. When you decelerate the one-way bearing freely moves reducing the chance of stalling which can be clearly noticed when cornering.
I have been looking through both instruction manuals but I don't personal own or know anyone that owns a TB03 so I can't directly compare the two side by side!
#1595
I've heard that it does, but cant say 100% if that's right. I hope so as i've always run 2 one-ways in my cars (center and front).
Liam
Liam
#1596
Hi can anyone tell me the difference between the EVO5 and EVO5MS
Thanks
Thanks
#1598
so dose they have the same chassie and top plate??
how much would I have to change to make it an ms?
how much would I have to change to make it an ms?
#1600
But the mayor changes of the MS are not so easy to build in an "normal Evo5"
Take a look here, there you can download the manual and compare.
http://www.tamiya.com/japan/download/rc_index.htm
Greetings Blueman
#1601
Tech Master
iTrader: (5)
I researched the conversion from a EVO 5 to a EVO 5 MS using the owner's manuals of both cars and it takes more then 20 pieces to perform the conversion and most are not available through Tamiya USA parts yet. The retail price of the parts is more the cost of a new MS kit off ebay....
#1602
I researched the conversion from a EVO 5 to a EVO 5 MS using the owner's manuals of both cars and it takes more then 20 pieces to perform the conversion and most are not available through Tamiya USA parts yet. The retail price of the parts is more the cost of a new MS kit off ebay....
Yeah thats right! I also played around with the idea to convert my Evo5 in an MS, but the MS parts are hard to get, and if you want to make a 100% conversion, you already can buy a whole kit.
So the new layout for fast change the spur is also not realy a must have for me, because i think i changed it 2 or 3 times in (i think) now 3 years of racing.
Greetings Blueman
#1604
Stellamodels has it in stock for only 44$USD
http://www.stellamodels.net/catalog/...oducts_id=2517
Think this is a good price!
Greetz Blueman
#1605
Tech Regular
Anyone know if the xray touring car springs fit ? have the 2.2 , 2.4 , 2.6 etc springs.