mr crum

iTrader: (5)

hey guys that used to run tc3 and 4 when i ran them we used to run a rear shock tower on the front to move the front boddy posts further up on the body do u think it would disturb the car to much to do this on the tc5

Maybell

iTrader: (2)

There is no need to do that on the TC5. The geometry is already correct.

Tubaboy

iTrader: (9)

Yeah I use that site. But will a 76/52 gear set fit in the TC5?

berserk

iTrader: (1)

deleted

mr crum

iTrader: (5)

but my question would it disturb the front end if i did it

Maybell

iTrader: (2)

I feel that the car would not work correctly if you did it. I say trust the design team. They know what they are doing.

Josh Hohnstein

iTrader: (3)

So who's going to the carpet nats??

revo61

iTrader: (18)

I don't think it would work. the shocks would set much futher out, the rear tower is much wider than the front. I would not do it. Feel free to try and post results.

Jim S

iTrader: (30)

if i go fro a 4:26 to a 5:00 will it make my car faster

this would be in 17.5 rubber

revo61

iTrader: (18)

No slower.

Jim S

iTrader: (30)

i got 1st in 17.5 a main but i am .3 slower then fast lap i have a 100/47 what can i do i hav a 17.5 duo and it felt a litttle warm

mr crum

iTrader: (5)

hey guys i bought a lf bulkhead from hobbytown and the center hole that screw the bulkhead to the to the chssis was not threaded from the factory should i email ae or take it back to hobbytown maybe kevin would know or have a suggestion thanks

geeunit1014

iTrader: (14)

how warm is a little warm? you should have some room to gear up(lower final drive). As long as the motor is around 170*f or lower, youll be fine.

Maybell

iTrader: (2)

Contact AE customer support and they will take care of you.

mr crum

iTrader: (5)

already did that thank you