T.O.P. Racing "Scythe" 1/10 EP Touring Car
#646
Tech Master
iTrader: (22)
Thanks sosidge,
Whereabouts can i buy those pistons from???... they fit the yokomo shocks then i assume.
In a race a while back i was struggling for grip entirely, once the car handled well it just didnt seem to go anywhere, through the corners it still skated and just didnt get power down, and i struggled to overcome it. Any ideas there???...
Perhaps my droop was out... as you say?
This has been running a spool however. with 5.25 springs all around from memory.
Cheers, thankyou for your help once again.
Robbie
Whereabouts can i buy those pistons from???... they fit the yokomo shocks then i assume.
In a race a while back i was struggling for grip entirely, once the car handled well it just didnt seem to go anywhere, through the corners it still skated and just didnt get power down, and i struggled to overcome it. Any ideas there???...
Perhaps my droop was out... as you say?
This has been running a spool however. with 5.25 springs all around from memory.
Cheers, thankyou for your help once again.
Robbie
#647
For the shock we jst drill out teh pistons to 1.2mm or 1.3mm and use 35wt - 45wt oil and it feels great.
Unusual for you have lack of steering, with teh oneway it turns on a dime with the spool you get initial understeer but great steering out of corners.
I actually run my dual rate down to 45%.
Like Sosidge mentioned check droop or ride height.
Unusual for you have lack of steering, with teh oneway it turns on a dime with the spool you get initial understeer but great steering out of corners.
I actually run my dual rate down to 45%.
Like Sosidge mentioned check droop or ride height.
#649
My car is plastic bulkheads, full deck.
#650
#651
Tech Fanatic
im running the full alloy car with full top deck kit shocks with kit large 2 hole pistons ive raised all the suspension mounts 1 mil. but ive also shortened all my camber links to the shortest setting to make the car turn and react the way i like it my droop is also at 5f 4r and traction is not even cose to becoming a problem
#653
Tech Fanatic
hey wes that is on asphalt yesterday was my first time on the rug it wasnt bad but not great either our track doesnt get real high bite ill be on the rug again on the 20th and then the birds once i find that money set up ill share with you guys
#654
Spurs
Need help on this what spurs fit this car 48dp or 64dp as i tried to fit a 48dp 84t spur in it yesterday and it would not go/?
Any ideas
Any ideas
#655
Spurs
If you run 64 dp spurs and pinions what range would you advice to carry?
#656
78t/48dp is what I run, I think you could fit a slightly larger one, maybe 1 or 2 teeth bigger, but the 78T has plenty of adjustment, I can run big pinions (30+) for 19T and small pinions for revvy 27T or mod with no problem.
Equivalent 64dp would be 104t.
Make sure you get a spur with 4 holes in the right place for it to fit. Kawada is what I use, as supplied by Much-More UK, and they are perfect.
Equivalent 64dp would be 104t.
Make sure you get a spur with 4 holes in the right place for it to fit. Kawada is what I use, as supplied by Much-More UK, and they are perfect.
#657
What kind of upgrades are people doing for rubber tire carpet. Should be getting 08 kit in early next week.
#658
I would run the car plastic and without bars unless the grip is high.
Apart from that just build the car and run it!
#659
Car is great for rubber tyres out of the box. The only significant parts that I am using that are not in the box are some Rayspeed shock pistons with bigger holes and the optional steel spool.
I would run the car plastic and without bars unless the grip is high.
Apart from that just build the car and run it!
I would run the car plastic and without bars unless the grip is high.
Apart from that just build the car and run it!
Thanks sosidge.
I will be running it next weekend at a Snow Birds warm up. Then its off to Snow Birds. How many Team Drivers are going to Snow Birds?
#660
Tech Fanatic
i think there will be 4 of us pitting trackside if you need any help at the birds just come find me my name is jason