R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

    Hide Wikipost
Old 09-10-2017, 07:26 AM   -   Wikipost
R/C Tech Forums Thread Wiki: Official Tekno RC EB410 Thread
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: RCBuddha
Welcome to the EB410 Wiki page.

Basic Stats/Features:


Shaft drive (tapered AL for light weight and straightness)
Gear differentials (all 3)
Low Angle CVAs (with captured pins so no ejecting them!)
Durable stub axles with 12mm hexes and optional offset adjustments
Reverse bellcrank steering system
Quick access bulkheads (for easy diff maintenance and tuning)
Spllt center diff holder (for easy diff maintenance and tuning)
CNC milled chassis
CNC milled adjustable hinge pin braces
8th scale style motor mount (for easy mesh adjustment)
13mm big bore shocks
3.5mm shock shafts
No EClips
Droop screws

Instruction Manual

EB410 Resources

Electronics requirements:

Shorty battery
Servo (low profile OR full size will both work, low profile will have lower CG)
Motor
ESC (Wiring: shortest possible with the ESC directly at back of motor)
Receiver


Additional things we know:

Works out of the box for mod or 13.5. Start mod gearing around 21t pinion, start 13.5 gearing around 29t pinion. Additional smaller spur gear(s) will also be made available.

Internal Gear Ratio: 2.5:1
For comparison:
B64 is 2.47:1
22-4 is 2.4:1
YZ4 is 2.6:1

Wheels

B6/22/rb6 wheels direct fit
22-4 front wheels direct fit
B64 front wheels will fit, but you need the +1 hexes (can use #TKR1654X, which is a +1mm hex)
22 2wd front wheels will also fit, possibly a good option for carpet.


Tips and Tricks

List of Vehicle Setup Adjustments and Build Tips can be found here. There are several videos and articles detailing the building of shocks, diffs, camber links, etc.

Setup Sheets:
Setup sheets for all Tekno RC vehicles can be found here. Please be sure to try our recommended setup. It works very well on most tracks.

Warranty Policy:

Tekno RC is the only company in the industry that will give 50% off of parts if returned to them using the General Warranty return policy found on their website. The parts can be lightly used or completely abused, as long as the part is still being produced it's covered!

Piston Drills:

Some of our setups recommend using pistons that are enlarged. For instance 4x1.9 or 3x2.0. To drill the pistons we recommend the following:
GMK Supply Piston Drill Set
16PC Metric Bit Set Metric Sizes 2.00 to 3.00 MM.

Print Wikipost

Like Tree621Likes
Reply
 
Thread Tools Search this Thread
Old 11-27-2016, 12:03 PM   #16
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 28,759
Trader Rating: 234 (100%+)
Default

sounds good. With the various vehicles being made in the 1/10 4wd class, I am looking forward to seeing what Tekno comes out with that will define the vehicle even if the general layout copies what the various manufacturers are going with.
__________________
Member - Red River Radio/Control Car Club
< Tekno SCT410.3 x 2 |HB Racing D413 x 2 | Tekno EB48SL x 2 | Yokomo YZ-2 DTM x 2>
Cain is offline   Reply With Quote
Old 11-27-2016, 05:35 PM   #17
Tech Addict
 
advpball's Avatar
 
Join Date: May 2007
Posts: 589
Trader Rating: 27 (100%+)
Default

subscribed
__________________
xray xb2 de and xsc2,eb410
eb 48.3 for sale artr 500
all powered by smc battery's and
hobbywing esc, airtronics controlled MT4s
advpball is offline   Reply With Quote
Old 11-30-2016, 05:21 PM   #18
Tech Adept
 
shadaloo's Avatar
 
Join Date: Oct 2016
Location: Deep South
Posts: 117
Default

The wait is too long!!!! ><
shadaloo is offline   Reply With Quote
Old 12-01-2016, 05:36 AM   #19
Tech Apprentice
 
oivaf1's Avatar
 
Join Date: Nov 2012
Location: Herndon VA
Posts: 58
Default

Good things come to those that wait
__________________
Associated SC10 4x4 (CC 3800kv- CC MMP ESC)
Associated RC10 T3 (CC 5700kv- CC Sidewinder ESC)
XTM X-Cellerator (.18 XTM nitro)
Tekno SCT 410.3 (CC 2400kv- CC MMP ESC)
oivaf1 is offline   Reply With Quote
Old 12-01-2016, 06:04 AM   #20
Tech Adept
 
Join Date: Jan 2015
Posts: 189
Trader Rating: 1 (100%+)
Default

That's true but I had to buy a ZX6.6 to tide me over. I was sick of associateds bs.
SpongeX is offline   Reply With Quote
Old 12-01-2016, 07:05 AM   #21
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 28,759
Trader Rating: 234 (100%+)
Default

hopefully the thread is updated with more info on a regular basis and not just the annoucement to keep people happy. Announcing this far out should be an interesting ride.

One thing I hope they can tell us now is what offset wheels the vehicle will use (be cool if you could use different offsets with a simple hex change)
__________________
Member - Red River Radio/Control Car Club
< Tekno SCT410.3 x 2 |HB Racing D413 x 2 | Tekno EB48SL x 2 | Yokomo YZ-2 DTM x 2>
Cain is offline   Reply With Quote
Old 12-01-2016, 10:04 AM   #22
Tech Master
 
Matthew_Armeni's Avatar
 
Join Date: Nov 2007
Location: San Diego
Posts: 1,472
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by Cain View Post
hopefully the thread is updated with more info on a regular basis and not just the annoucement to keep people happy. Announcing this far out should be an interesting ride.

One thing I hope they can tell us now is what offset wheels the vehicle will use (be cool if you could use different offsets with a simple hex change)
Are you referring to the front or rear wheels? The offsets between the different brands are all very close, just the tube length of the axle hole is different on the rears. The fronts are also very close across the brands, very little difference in offset and the Kyosho just has a smaller axle hole. But to your question, right now all I can say is that it will have 12mm hexes front and rear.

Side note, I really hope the new IFMAR rules get enforced. Then all wheels will be standard across all cars. I don't think they've released the 2wd front offset rules yet, but it can't be long. It's kind of amazing to me that the class has been around as long as it has without having stricter wheel dimensions.
__________________
Tekno RC
Matthew_Armeni is online now   Reply With Quote
Old 12-01-2016, 10:35 AM   #23
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 28,759
Trader Rating: 234 (100%+)
Default

Quote:
Originally Posted by Matthew_Armeni View Post
Are you referring to the front or rear wheels? The offsets between the different brands are all very close, just the tube length of the axle hole is different on the rears. The fronts are also very close across the brands, very little difference in offset and the Kyosho just has a smaller axle hole. But to your question, right now all I can say is that it will have 12mm hexes front and rear.

Side note, I really hope the new IFMAR rules get enforced. Then all wheels will be standard across all cars. I don't think they've released the 2wd front offset rules yet, but it can't be long. It's kind of amazing to me that the class has been around as long as it has without having stricter wheel dimensions.
Mainly thinking about the TLR 12mm 4wd front offset. I got some of those wheels as that is what works for the dex410v5 12mm exotek conversion. Rears would be B6 compatible here.
__________________
Member - Red River Radio/Control Car Club
< Tekno SCT410.3 x 2 |HB Racing D413 x 2 | Tekno EB48SL x 2 | Yokomo YZ-2 DTM x 2>
Cain is offline   Reply With Quote
Old 12-07-2016, 09:23 PM   #24
Tech Elite
 
justpoet's Avatar
 
Join Date: Jan 2012
Location: NH, USA
Posts: 2,032
Trader Rating: 16 (100%+)
Default

I ran Kyosho 10th scales for a long time, still have a few. A common thing we did was the Avid rear stub axle change so that one could use the other wheel thicknesses and everything would fit for any brand 12mm rear wheel.
__________________
"We do not act rightly because we have virtue or excellence, but we rather have those because we have acted rightly. We are what we repeatedly do. Excellence, then, is not an act but a habit." -Aristotle
My wallet supports: TeknoRC.com, NorCalHobbies.com, SMC, Tekin, and several tire/servo companies.
justpoet is offline   Reply With Quote
Old 12-18-2016, 11:30 PM   #25
Tech Adept
 
Join Date: Sep 2011
Location: San Diego, CA
Posts: 123
Trader Rating: 1 (100%+)
Default

Any more news on this?
Any peaks?
Just a small peak, come on🤑🤑🤑
Allen Drebi is offline   Reply With Quote
Old 12-19-2016, 08:50 AM   #26
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 28,759
Trader Rating: 234 (100%+)
Default

with the announcement this far out, I'd be curious what they would be willing to divulge.

I do hope to see some Tekno specific takes on the layout of a 1/10 4wd buggy. From my perspective at least I'd be curious on the benefits of a more inline electronic setup (servo centered ala durango) versus the current way other designs are going.
__________________
Member - Red River Radio/Control Car Club
< Tekno SCT410.3 x 2 |HB Racing D413 x 2 | Tekno EB48SL x 2 | Yokomo YZ-2 DTM x 2>
Cain is offline   Reply With Quote
Old 12-22-2016, 03:01 AM   #27
Tech Master
 
Join Date: Feb 2015
Posts: 1,061
Trader Rating: 6 (100%+)
Default

I am hope same layout as a buggy but smaller size
coombes is offline   Reply With Quote
Old 12-22-2016, 04:20 AM   #28
Tech Addict
 
advpball's Avatar
 
Join Date: May 2007
Posts: 589
Trader Rating: 27 (100%+)
Default

12 mm hexes? I hope,something close to xray's xb4
__________________
xray xb2 de and xsc2,eb410
eb 48.3 for sale artr 500
all powered by smc battery's and
hobbywing esc, airtronics controlled MT4s
advpball is offline   Reply With Quote
Old 12-22-2016, 12:03 PM   #29
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 28,759
Trader Rating: 234 (100%+)
Default

yeah i think 12mm would be a given but you never know.

It would be cool if it would be possible to do a layout similar to the eb48.3 . Or who knows, maybe something that allows more weight bias changes that what we currently see with other vehicles.

not saying thats a requirement for me, just curious on Tekno's take on things.
__________________
Member - Red River Radio/Control Car Club
< Tekno SCT410.3 x 2 |HB Racing D413 x 2 | Tekno EB48SL x 2 | Yokomo YZ-2 DTM x 2>
Cain is offline   Reply With Quote
Old 12-22-2016, 03:27 PM   #30
Tech Master
 
Join Date: Feb 2015
Posts: 1,061
Trader Rating: 6 (100%+)
Default

For me to used my lipos out my truck that would be a good thing as I don't want buy different lipos
coombes is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Official Team Associated RC10B64 Thread RCBuddha Electric Off-Road 2644 Today 05:39 AM
The Official Tekno ET48 Thread Matthew_Armeni Electric Off-Road 5336 Yesterday 09:18 PM
Official Tekno RC EB48SL Thread Matthew_Armeni Electric Off-Road 984 09-12-2017 01:40 PM



Currently Active Users Viewing This Thread: 6 (1 members and 5 guests)
Matthew_Armeni
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:11 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net