Firefighter_234

Just bought a losi scte roller and was wondering what would be a good combo for esc and motor. I don't do much racing but plan on making this a race rig and trying some racing. And was wondering if the mip pro4 is worth it or not

Bh1989

Which Version is it? the 2.0 or Original.If it is a 2.0 then I don't think the MIP Pro 4 is needed. As far as ESC I use the Tekin RX8 Gen 2 and Motor is Tekin Pro4 HD 4300kv. Great combo for this truck.

Firefighter_234

It's the original.

Laz79

I run this combo and it works beautifully (Hobbywing Xerun SCT Pro Sensored Brushless ESC/Motor Combo (4700kV)
Set up for 2s Lipo only with this motor

deceit

iTrader: (-1)

I also have the original, what upgrades would you guys recommend? I dont see the mip pro4mance upgrade kit or tuning kit available anymore.. or the losi version...

Firefighter_234

Are the body mounts the same in a scte and a scte 2.0?

EJ2civic

Yes, the body mounts are the same for both trucks

Bikemaster00

iTrader: (4)

I second this. I have the Tekin rx8 gen 2 and Pro4 4600kv motor on my SCTE 2.0. I race on a indoor clay track and it has plenty of power and have it geared perfect for the track and to keep the temps down. If you run on a larger outdoor track I would maybe recommend the pro4 HD 4300kv but for me the 4600kv was plenty I have both the 4600kv and 4300kv I stuck with the 4600kv because it has enough power for my needs and its smaller and therefore translates to less weight on my truck also. I highly recommend going with Tekin though yes there a bit higher in price but they make quality stuff and there support is pretty good.

Firefighter_234

What is the sizes of the outter berring on the rear hub

Dave H

Please use one of the existing threads going forward. No need for another. Thanks.

http://www.rctech.net/forum/electric...highlight=scte

http://www.rctech.net/forum/electric...highlight=scte