TLR 22-4 2.0 Race Kit Thread!
|
|||
#481
Tech Prophet
iTrader: (34)
Any recommendations on electronics?
Finishing up the build on my 2.0 and am interested in running the 13.5 class at OCRC.
Motor?
ESC?
Also servos... I picked up the spektrum s6240 servo and it seems like it won't work. It's low profile so the base of it is right in line with the "jack shaft"...
Frank it appears you're running the same servo - maybe I am missing something
Thanks in advance!
Finishing up the build on my 2.0 and am interested in running the 13.5 class at OCRC.
Motor?
ESC?
Also servos... I picked up the spektrum s6240 servo and it seems like it won't work. It's low profile so the base of it is right in line with the "jack shaft"...
Frank it appears you're running the same servo - maybe I am missing something
Thanks in advance!
Ryan covered this on the included video
#482
Any recommendations on electronics?
Finishing up the build on my 2.0 and am interested in running the 13.5 class at OCRC.
Motor?
ESC?
Also servos... I picked up the spektrum s6240 servo and it seems like it won't work. It's low profile so the base of it is right in line with the "jack shaft"...
Frank it appears you're running the same servo - maybe I am missing something
Thanks in advance!
Finishing up the build on my 2.0 and am interested in running the 13.5 class at OCRC.
Motor?
ESC?
Also servos... I picked up the spektrum s6240 servo and it seems like it won't work. It's low profile so the base of it is right in line with the "jack shaft"...
Frank it appears you're running the same servo - maybe I am missing something
Thanks in advance!
#484
Perfect thank you
#485
Ok looking at the Tekin stuff since that's what I run on my 4.0E
Thabks
Thabks
#487
What is the part number for the little 5x7.5x1mm shim/washers TLR uses on their axles? I lost one and looked everywhere for a replacement or equivalent. Closest thing I could find is 5x7x0.5mm.
#490
Traxxas also sells an axle shim set that works. I'm not sure of the part number.
#491
__________________________________________________
One of the outdoor tracks is a small-ish (75' x 75') slick to med traction with lots of 180 degree turns with 23 sec lap times and the other is a larger outdoor track (90' x 120' ) slick to med/high traction with sweeping turns and 30 sec lap times. Have yet to try it on the indoor blue groove track.
One of the outdoor tracks is a small-ish (75' x 75') slick to med traction with lots of 180 degree turns with 23 sec lap times and the other is a larger outdoor track (90' x 120' ) slick to med/high traction with sweeping turns and 30 sec lap times. Have yet to try it on the indoor blue groove track.
#492
Tech Initiate
iTrader: (5)
TLR doesn't have them on their own as Frank mentioned, I tried also to get some when doing the 1.0 rear end conversion. However XRAY sells them in packs...
#493
You can get them here: https://www.amainhobbies.com/xray-sh...a338586/p13887
TLR doesn't have them on their own as Frank mentioned, I tried also to get some when doing the 1.0 rear end conversion. However XRAY sells them in packs...
TLR doesn't have them on their own as Frank mentioned, I tried also to get some when doing the 1.0 rear end conversion. However XRAY sells them in packs...
#495
You can get them here: https://www.amainhobbies.com/xray-sh...a338586/p13887
TLR doesn't have them on their own as Frank mentioned, I tried also to get some when doing the 1.0 rear end conversion. However XRAY sells them in packs...
TLR doesn't have them on their own as Frank mentioned, I tried also to get some when doing the 1.0 rear end conversion. However XRAY sells them in packs...