TLR 22-4 2.0 Race Kit Thread!
|
|||
#572
Thanks Frank
#573
Any recommendation on getting a stripped out setscrew out of my outdrive?
#574
Tech Prophet
iTrader: (34)
An MIP tool!
Did you thread lock it in place?
You can use a demel and cut it off through the screw then replace the outdrive
http://www.tlracing.com/Products/Def...odID=TLR232049
Did you thread lock it in place?
You can use a demel and cut it off through the screw then replace the outdrive
http://www.tlracing.com/Products/Def...odID=TLR232049
#575
An MIP tool!
Did you thread lock it in place?
You can use a demel and cut it off through the screw then replace the outdrive
http://www.tlracing.com/Products/Def...odID=TLR232049
Did you thread lock it in place?
You can use a demel and cut it off through the screw then replace the outdrive
http://www.tlracing.com/Products/Def...odID=TLR232049
#576
I'm out of commission until I can get my hands on a front pivot brace.
Broke today
Broke today
#578
Does anyone have a part # for the 68mm rear universals.
#579
So for the loose outdoor surface I removed the rear sway bar and lighten'd shocks to 27.5 and 22.5, removed all the shock limiters. And set diffs to 20 in the front and 10 in the back. I also removed shims on the camber block in the rear end. It took me a while to get this new car to drive like the 1.0 but now that I have it dialed it's a great car! Belts are lasting longer, I haven't lost a ball cup yet. It feels more consistent and it seems to handle mid corner bumps a lot better. I am excited to see what it does on the carpet this winter.
#581
#582
yea, i hear ya...my car is dialed but I'm a little concerned about breaking the pivot until more are available so I'm waiting, this car is the absolute best 4wd i have ever owned so I'm itching to get back on the track. I was wondering if there is a metal replacement , however I probably would stay with the plastic as there needs to be some give, I'd rather replace a pivot than arms or hinge pins as it is super quick and easy, overall this car is extremley durable..love it
#584
The 2.0 came with the updated hingepins, and the Steel brace from the 1.0 car doesn't fit on the 2.0 car... does it? The shape of the chassis on the 2.0 in front doesn't have the 90 degree angles for the brace to slide into like the old car had.
#585
Tech Prophet
iTrader: (34)
The 2.0 has a steel front brace. It is different style then the 1.0 but is no longer alum.
http://www.tlracing.com/Products/Def...rodId=TLR03007
see item #13
http://www.tlracing.com/Products/Def...rodId=TLR03007
see item #13