Team Associated B6 & B6D thread
|
|||
#5056
Tech Champion
iTrader: (170)
Will these work for us?
https://www.amainhobbies.com/team-lo...232059/p553890
Or really, are there any bone options for the wide pivot that will allow the use of the MIP diff (aluminum outdrives)? Like maybe these:
https://www.amainhobbies.com/exotek-...xo1708/p543356
https://www.amainhobbies.com/team-lo...232059/p553890
Or really, are there any bone options for the wide pivot that will allow the use of the MIP diff (aluminum outdrives)? Like maybe these:
https://www.amainhobbies.com/exotek-...xo1708/p543356
https://www.amainhobbies.com/team-lo...232052/p499658
Couldn't tell you about puck driveshafts...I don't use pucks.
#5057
Tech Initiate
#5058
Tech Master
iTrader: (5)
We are running the 67mm bones combined with the offset rear hub bearing spacers that move the bearings and axle out 1.5mm. The longer bones get the driveshaft back into outdrive in the proper spot. This combination on the laydown car makes the rear end squat real hard under acceleration. Gives more grip under power.
pushing everything 1.5mm out, how does that affect side bite? I run 5mm rear hexes vs the stock ones to narrow the rear of the car which has made the car easier to drive a little more aggressively in and out of the corners.
I have more but have to come back to this.
#5060
The way you describe it makes me want to try it, but I got some questions first.
pushing everything 1.5mm out, how does that affect side bite? I run 5mm rear hexes vs the stock ones to narrow the rear of the car which has made the car easier to drive a little more aggressively in and out of the corners.
I have more but have to come back to this.
pushing everything 1.5mm out, how does that affect side bite? I run 5mm rear hexes vs the stock ones to narrow the rear of the car which has made the car easier to drive a little more aggressively in and out of the corners.
I have more but have to come back to this.
#5061
#5062
#5063
Tech Rookie
I'm sure this has been asked before so sorry but what advantage does removing 2 gears from the diff make?. I have seen quite a few setups that mention 2 gears.
Thank
Thank
#5064
#5065
Where can we pick up the hub bearing spacers?
#5066
Tech Initiate
#5068
Tech Master
iTrader: (5)
Only problem is I can not find the BMI spacers. Ive googled everything I could to try to find them and have no idea what they look like or what they do even. Their website is terrible, the online store does not work and their facebook page doesnt seem like its been used in years. Any help would be greatly appreciated.
#5069
Okay, so you have me convinced to try it. I am gonna try it with the MIP axles as I do have pucks in the car now.
Only problem is I can not find the BMI spacers. Ive googled everything I could to try to find them and have no idea what they look like or what they do even. Their website is terrible, the online store does not work and their facebook page doesnt seem like its been used in years. Any help would be greatly appreciated.
Only problem is I can not find the BMI spacers. Ive googled everything I could to try to find them and have no idea what they look like or what they do even. Their website is terrible, the online store does not work and their facebook page doesnt seem like its been used in years. Any help would be greatly appreciated.
[email protected]