R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

    Hide Wikipost
Old 08-23-2016, 10:37 AM   -   Wikipost
R/C Tech Forums Thread Wiki: TLR 22 3.0 Race Kit Thread!
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: Matt Trimmings
Cub86 posted the question: Hi. I'm struggling to understand the lay down situation. I run on high bite damp smooth clay and think the conversation would help on my surface but from what I'm reading I need to buy the lay down kit tlr338004. And the dirt gear case tlr332063. But do I really need both from what I've read the dirt case is 1-2mm higher anyway and u don't use the +3mm hubs or the front pivot hrc or Hrc mod. So is the dirt lay down kit tlr332063 is all that's needed to get me a lay down set up that's suited for clay With the components and car I already have. And if I only get the dirt case is there any problems that will need to be addressed IE.. bone plunge . I do know I'll need 1mm spacers on the waterfall to clear the battery. Thanks guys really trying to get my head around this.

Franks response:
Laydown Conversion will work great by itself. You run the aluminum +3mm hubs, the diff is +3.5mm, and you run the HRC front setup. Just follow a setup sheet from tlracing.com (Frank Root).

Dirt Tranny has the diff at the same height as the standard tranny case, and works with the standard plastic hubs. Both are +/- 0mm from stock. When you run this, no need to run the HRC front mod either.

I've found the stock laydown conversion parts to work great for most tracks. The dirt tranny is a great tuning option, but definitely not 'required'.

K.King
Something I made, pretty basic. Just to give people an idea.

Print Wikipost

Like Tree12Likes
Reply
 
Thread Tools Search this Thread
Old 12-09-2015, 12:29 PM   #871
Super Moderator
 
Matt Trimmings's Avatar
 
Join Date: Jun 2006
Location: Tucson AZ
Posts: 5,706
Trader Rating: 156 (100%+)
Default

Quote:
Originally Posted by HotRod127 View Post
don't have facebook, but i guess i can see what i can do
I was pretty happy with how mine came out.
__________________
Thanks to: JConcepts ~ Schelle ~ Kustom RC Graphics

#MakeRCTechGreatAgain

Last edited by Matt M.; 03-11-2017 at 03:28 AM.
Matt Trimmings is offline   Reply With Quote
Old 12-09-2015, 12:32 PM   #872
Tech Prophet
 
Wildcat1971's Avatar
 
Join Date: Apr 2012
Location: Arizona
Posts: 16,945
Trader Rating: 81 (100%+)
Default

What motor is that?
__________________
Support: Team Associated | Reedy Motors & ESC's | Sanwa Radios | Avid | Proline Tires
Wildcat1971 is offline   Reply With Quote
Old 12-09-2015, 12:34 PM   #873
Super Moderator
 
Matt Trimmings's Avatar
 
Join Date: Jun 2006
Location: Tucson AZ
Posts: 5,706
Trader Rating: 156 (100%+)
Default

Quote:
Originally Posted by Wildcat1971 View Post
What motor is that?
Hobbywing
__________________
Thanks to: JConcepts ~ Schelle ~ Kustom RC Graphics

#MakeRCTechGreatAgain
Matt Trimmings is offline   Reply With Quote
Old 12-09-2015, 12:35 PM   #874
Tech Prophet
 
Wildcat1971's Avatar
 
Join Date: Apr 2012
Location: Arizona
Posts: 16,945
Trader Rating: 81 (100%+)
Default

Quote:
Originally Posted by Matt Trimmings View Post
Hobbywing
cool. The new G2? or just a v10
__________________
Support: Team Associated | Reedy Motors & ESC's | Sanwa Radios | Avid | Proline Tires
Wildcat1971 is offline   Reply With Quote
Old 12-09-2015, 12:36 PM   #875
Super Moderator
 
Matt Trimmings's Avatar
 
Join Date: Jun 2006
Location: Tucson AZ
Posts: 5,706
Trader Rating: 156 (100%+)
Default

Quote:
Originally Posted by Wildcat1971 View Post
cool. The new G2? or just a v10
"just" a V10. I like it so far...you know how much I race.
__________________
Thanks to: JConcepts ~ Schelle ~ Kustom RC Graphics

#MakeRCTechGreatAgain
Matt Trimmings is offline   Reply With Quote
Old 12-09-2015, 12:41 PM   #876
Tech Prophet
 
Wildcat1971's Avatar
 
Join Date: Apr 2012
Location: Arizona
Posts: 16,945
Trader Rating: 81 (100%+)
Default

Quote:
Originally Posted by Matt Trimmings View Post
"just" a V10. I like it so far...you know how much I race.
Cool. Let me know when you are selling me your 22 3.0
__________________
Support: Team Associated | Reedy Motors & ESC's | Sanwa Radios | Avid | Proline Tires
Wildcat1971 is offline   Reply With Quote
Old 12-09-2015, 01:00 PM   #877
Super Moderator
 
Matt Trimmings's Avatar
 
Join Date: Jun 2006
Location: Tucson AZ
Posts: 5,706
Trader Rating: 156 (100%+)
Default

Quote:
Originally Posted by Wildcat1971 View Post
Cool. Let me know when you are selling me your 22 3.0
__________________
Thanks to: JConcepts ~ Schelle ~ Kustom RC Graphics

#MakeRCTechGreatAgain
Matt Trimmings is offline   Reply With Quote
Old 12-09-2015, 02:40 PM   #878
Tech Adept
 
HotRod127's Avatar
 
Join Date: Aug 2011
Location: Neenah, WI
Posts: 249
Trader Rating: 14 (100%+)
Default

Quote:
Originally Posted by Matt Trimmings View Post
I was pretty happy with how mine came out.
Thanks alot Matt, that looks really good and clean
__________________
Kyosho RB6.6/ Kyosho ZX6.6/ Kyosho RT6/ Kyosho America- Peak Racing Products- Team Orion- AKA- JTP- 92zerodesigns
HotRod127 is offline   Reply With Quote
Old 12-09-2015, 02:58 PM   #879
Tech Master
 
Join Date: Sep 2009
Posts: 1,901
Trader Rating: 9 (100%+)
Default

I plan to run 17.5 or 13.5 blinky, and the manual suggests a 70T spur. But it seems TLR does not make a 70T spur for the HDS slipper. What parts do I need to use the 70T spur? Thanks
__________________
Kyosho Inferno MP9 TKI4
TLR 22 3.0
Apex RC Proshop
inpuressa is offline   Reply With Quote
Old 12-09-2015, 03:01 PM   #880
Super Moderator
 
Matt Trimmings's Avatar
 
Join Date: Jun 2006
Location: Tucson AZ
Posts: 5,706
Trader Rating: 156 (100%+)
Default

Quote:
Originally Posted by inpuressa View Post
I plan to run 17.5 or 13.5 blinky, and the manual suggests a 70T spur. But it seems TLR does not make a 70T spur for the HDS slipper. What parts do I need to use the 70T spur? Thanks
2 of these: http://www.amainhobbies.com/rc-cars-...osa3123/p15125

1 of these: http://www.amainhobbies.com/rc-cars-...63883?v=216080

The 70t spur is too small to be mated properly with the HDS pads.
__________________
Thanks to: JConcepts ~ Schelle ~ Kustom RC Graphics

#MakeRCTechGreatAgain
Matt Trimmings is offline   Reply With Quote
Old 12-09-2015, 03:06 PM   #881
Tech Regular
 
RedBMaster's Avatar
 
Join Date: Jul 2011
Location: Nashville, TN
Posts: 451
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Davidka View Post
More info:
What surface do you race on?
What is the rest of the setup (shock positions, camber links, etc.)?
Do you have any drag-brake in your ESC settings?

I ask the last question because if you're lowering the front that much, I question if you're getting a normal amount of weight transfer from to rear when you turn in.
Running high traction indoor clay with AKA clay slicks.
Kit setup, but changed to 32.5 rear oil.
Yes, but I always run minimal drag brake to keep up my corner speed. Adjusting this isn't in my interest tho. I use push brake where I need and the same drag break setup worked great in my 2.5 (Exotek CF chassis).

Now that Maifield's setup had been posted, I'll prolly start there.
RedBMaster is offline   Reply With Quote
Old 12-09-2015, 03:22 PM   #882
Tech Elite
 
vito's Avatar
 
Join Date: Nov 2011
Location: roseburg or
Posts: 3,928
Default

this i my 3rd losi 22 had a 2.0 and 1.0 kit love this car the build up was spot on
__________________
the happy racer
drango 410 v 4
am dyslexic
b5 mid motor
vito is offline   Reply With Quote
Old 12-09-2015, 05:26 PM   #883
Tech Fanatic
 
shadowracer24's Avatar
 
Join Date: Jul 2010
Location: lakeland fla.
Posts: 751
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Matt Trimmings View Post
1.5mm is what I used
That's what I thought would fit but seems to small in my pins. Use mip tips so know they are good. Huh! Oh well no big deal just kinda weird.
shadowracer24 is offline   Reply With Quote
Old 12-09-2015, 05:36 PM   #884
Tech Champion
 
Davidka's Avatar
 
Join Date: Oct 2004
Posts: 9,861
Trader Rating: 75 (100%+)
Default

Quote:
Originally Posted by inpuressa View Post
I plan to run 17.5 or 13.5 blinky, and the manual suggests a 70T spur. But it seems TLR does not make a 70T spur for the HDS slipper. What parts do I need to use the 70T spur? Thanks
If you're willing to go off the reservation, you can go this way too:

1 of these: http://www.amainhobbies.com/rc-cars-...62753?v=166400

1 of these: http://www.amainhobbies.com/rc-cars-...asc9603/p16646
__________________
"I have no idea what you're talking about, so here's a bunny with a pancake on it's head."

In mind and body, we're all heading towards old age. It is slower to go by bike.
Davidka is offline   Reply With Quote
Old 12-09-2015, 06:00 PM   #885
Tech Master
 
Join Date: Sep 2009
Posts: 1,901
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by Davidka View Post
If you're willing to go off the reservation, you can go this way too:

1 of these: http://www.amainhobbies.com/rc-cars-...62753?v=166400

1 of these: http://www.amainhobbies.com/rc-cars-...asc9603/p16646
It's the cheaper route, but I think I will be crucified for that second part
__________________
Kyosho Inferno MP9 TKI4
TLR 22 3.0
Apex RC Proshop
inpuressa is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:12 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net