Team Associated SC5M Thread
|
|||
#406
#407
#408
does anyone know if the Lundsford super duty turnbuckles for the SC10 will work on the truck, Thanks
#409
Tech Prophet
iTrader: (84)
#410
I have a set sitting around for the SC10 that I never used , should work right?
#412
Turnbuckles
http://www.amain.com/rc-cars/lunsfor...s12021/p445555
http://www.amain.com/rc-cars/lunsfor...s12016/p151867
Maybe you could chop them down and rethread if you have the resources to save some change?
#413
#414
I used the titanium sc10 turnbuckles on my T5m without an issue.
#415
#416
Can one of you do me a favor please? Looking for the weight of the rear bumper and body mounts. Want to know how much lighter they are than the ones I made. Thanks
Nick
Nick
#418
A few questions.
My rear axles "float" in the hub carrier pushing the outer bearing out slightly. Not sure if that is by design. Also, will any of the JC clamping hexes work, but still maintain the correct offset? Not fond of the associated blue hexes. Thanks!
For those of you who want to use lunsford turnbuckles, I ordered 3 sets of the 3mm punisher 2 5/8" and they are perfect, no drill needed.
My rear axles "float" in the hub carrier pushing the outer bearing out slightly. Not sure if that is by design. Also, will any of the JC clamping hexes work, but still maintain the correct offset? Not fond of the associated blue hexes. Thanks!
For those of you who want to use lunsford turnbuckles, I ordered 3 sets of the 3mm punisher 2 5/8" and they are perfect, no drill needed.
#419
#420