R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

    Hide Wikipost
Old 10-10-2017, 01:54 PM   -   Wikipost
R/C Tech Forums Thread Wiki: Tekno RC SCT410.3 Thread
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: DirkW
Welcome to the SCT410.3 Wiki!

7.26.17 - BB
In order to run the recommended team setup, you need the following optional parts:
TKR6106 Orange LF Springs
TKR6114 Green LF Springs
TKR6018 composite shock caps (built to emulsion) OR TKR8702 Aluminum Emulsion Shock caps
TKR8027 Shock Stand Offs
TKR6051 8x1.3 pistons(drilled to 1.4mm)
TKR8104 .4 bellcranks
TKR8100 .4 ackerman
TKR5545B HRC Hubs
You also need the Aluminum C Block (others can stay composite)

What option parts should I consider buying with a new kit?
None are required but we recommend the following:

TKR5161 V2 Adjustable Hinge Pin Brace A block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5163 V2 Adjustable Hinge Pin Brace C block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5545B HRC Rear Hubs (L/R, CV or uni, SCT.3/SL) - Improves stability of the rear on mid to corner exit. Allows harder acceleration on corner exit.

TKR6146 - CNC Delrin Shock Cartridge Set

TiNi Shock Shafts
-TKR6004T (front)
-TKR6017T (rear)


What spare parts should I keep on hand?
TKR5020 Hinge Pins (inner, front/rear)
TKR5516 Front Suspension Arms and TKR5515 Rear Suspension Arms
TKR5542 Spindle Carriers - TKR5541B Spindles
TKR6009 Shock O-Ring and Bladder Set (for 2 shocks)

Tips and Tricks

List of Vehicle Setup Adjustments and Build Tips can be found here. There are several videos and articles detailing the building of shocks, diffs, camber links, etc.

Setup Sheets:
Setup sheets for all Tekno RC vehicles can be found here. Please be sure to try our recommended setup. It works very well on most tracks.

Warranty Policy:
Tekno RC is the only company in the industry that will give 50% off of parts if returned to them using the General Warranty return policy found on their website. The parts can be lightly used or completely abused, as long as the part is still being produced it's covered!

Piston Drills:
Some of our setups recommend using pistons that are enlarged. For instance 4x1.9 or 3x2.0. To drill the pistons we recommend the following:
GMK Supply Piston Drill Set
16PC Metric Bit Set Metric Sizes 2.00 to 3.00 MM.

Print Wikipost

Like Tree87Likes
Reply
 
Thread Tools Search this Thread
Old 04-07-2016, 12:39 AM   #3361
Tech Rookie
 
Join Date: Mar 2016
Posts: 19
Default

Quote:
Originally Posted by weedsnager View Post
With the Hobbywing 4000, running on 2s...7200, with the 16t, outdoors, is there anything I need to tweak with the esc program card or just run it as is out of the box ?
I have the HW4000 and HW xerun sct pro, running 18T . The only thing I changed was the low voltage cut-off value. I changed it to the highest value
Snorkel54 is offline   Reply With Quote
Old 04-07-2016, 04:09 AM   #3362
Tech Addict
 
Dan.J's Avatar
 
Join Date: May 2014
Location: S/W lower Michigan
Posts: 748
Trader Rating: 21 (100%+)
Default

Quote:
Originally Posted by weedsnager View Post
With the Hobbywing 4000, running on 2s...7200, with the 16t, outdoors, is there anything I need to tweak with the esc program card or just run it as is out of the box ?
Unless your outdoor track is SUPER tiny I would gear the 4000 at 18T, doesn't really need any timing added and as far a specific settings in the ESC goes it really depends on what ESC you are running?
__________________
Tekno EB48.3/Tekno EB48SL/Tekno SCT410.3
Dan.J is offline   Reply With Quote
Old 04-07-2016, 05:56 AM   #3363
Tech Regular
 
Join Date: May 2013
Location: SW Michigan
Posts: 392
Trader Rating: 19 (100%+)
Default

sounds like I should bump my gearing up to 18t also
__________________
TEKNO SCT410.3; Hobbywing Sct-pro; Hobbywing 3656 4000kv; Protek 130S; SPC 70C 7200mAh 2s
TEKNO EB48.3; Hobbywing Xerun 150a; SMC 1900kv; Savox 2274SG; ECO Power 35c 4100mAh 4s
Associated B5R; Trackstar 120a turbo; Trackstar 8.5t; Solar D771; Reedy 65C 5800mAh 2s square
kyleman7 is offline   Reply With Quote
Old 04-07-2016, 06:28 AM   #3364
Tech Regular
 
Join Date: Apr 2016
Location: St John, In
Posts: 258
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by Dan.J View Post
Unless your outdoor track is SUPER tiny I would gear the 4000 at 18T, doesn't really need any timing added and as far a specific settings in the ESC goes it really depends on what ESC you are running?
Hobbywing Xerun SCT Pro
weedsnager is offline   Reply With Quote
Old 04-07-2016, 08:34 AM   #3365
Tech Initiate
R/C Tech Elite Subscriber
 
Join Date: Mar 2016
Location: Tallmadge Ohio
Posts: 49
Default

Quote:
Originally Posted by Slotmachine View Post
How long is your track laptime wise? I run on a 100ft straight track with 18sec laptimes with a 17 pinion with no heat problems in a 6 minute race. My boost is 8 and timing is 7.
About 23 seconds. Long straight but a bunch of tight turns
__________________
HPI Trophy Truggy, Tekno 410.3 sct, TLR 8ight e 3.0, Associated B5M, Tlr 8ight 4.0, tlr 8ight e 4.0, tlr scte 2.0, associated rc8t3e
mikey91martin is offline   Reply With Quote
Old 04-07-2016, 04:28 PM   #3366
Tech Addict
 
Dan.J's Avatar
 
Join Date: May 2014
Location: S/W lower Michigan
Posts: 748
Trader Rating: 21 (100%+)
Default

Quote:
Originally Posted by weedsnager View Post
Hobbywing Xerun SCT Pro
I don't run that ESC but I would start with 18T on the 4000, Zero timing in the ESC and punch setting in the 5-7 range and then what ever brake % you need. Going to have to play with your punch and brake% to find what you need/like.
__________________
Tekno EB48.3/Tekno EB48SL/Tekno SCT410.3
Dan.J is offline   Reply With Quote
Old 04-07-2016, 04:58 PM   #3367
Tech Regular
 
Join Date: Apr 2016
Location: St John, In
Posts: 258
Trader Rating: 11 (100%+)
Default

Is it true the Hobbywing xerun sct pro can't handle a Hv servo ? I ordered the savox 1268 servo

http://www.amainhobbies.com/rc-cars-...1268sg/p183318

Last edited by weedsnager; 04-07-2016 at 06:19 PM.
weedsnager is offline   Reply With Quote
Old 04-07-2016, 05:25 PM   #3368
Tech Addict
 
bashslash1971's Avatar
 
Join Date: Feb 2011
Location: P-Town
Posts: 623
Trader Rating: 18 (100%+)
Default Hey

Ok Im sure this is back some pages who knows where , but Im thinking of swapping out to 17mm wheels what are some of the Pros and Cons ????



Tekno RC SCT410.3 Thread-img_1550.jpg
__________________
All the rest before dont count now !! It is TEKNO 410.3 !!!!
bashslash1971 is offline   Reply With Quote
Old 04-07-2016, 06:14 PM   #3369
Moderator
 
bds81175's Avatar
 
Join Date: Jan 2011
Location: Litchfield, Minnesota
Posts: 2,744
Trader Rating: 20 (100%+)
Default

About the only con I can think of is there are limited manufacturers making the wheels.
__________________
Current Racers: AE B6D, Tekno SCT410, Tekno EB48.3
Full Throttle R/C Raceway www.ftrcr.com, Psycho Dog Racing Team, Team Holy Rollers - Greatest RC race team on the planet. Well, at least the team with the best sponsor.
Tekno RC
bds81175 is offline   Reply With Quote
Old 04-07-2016, 06:19 PM   #3370
mkl
Tech Fanatic
 
Join Date: Jul 2011
Posts: 898
Trader Rating: 6 (100%+)
Default

I would agree, only con is limited choices of wheels. But the DE Racing Borrego wheels are quite nice.
I have only had once chance to race since I got my MIP 17mm conversion but I really liked the solid connection. I did break two axles but they were the original style from the SCT410 and 2-3 years old. So I am not sure what broke them, age, or the conversion. I should be able to race next weekend to get another race on them.
If I break another axle I am going to use the 48SL axles and Traxxas 17mm hex. I see no reason to stay with 12mm hex.
__________________
Tekno SCT410, Tekno EB48, Tekno ET48, X-Ray 808E, TRCE Slash 4x4, Tamiya Lunchbox, Tamiya Frog, Slash 4x4, Axial Wraith
mkl is offline   Reply With Quote
Old 04-07-2016, 06:48 PM   #3371
Moderator
 
bds81175's Avatar
 
Join Date: Jan 2011
Location: Litchfield, Minnesota
Posts: 2,744
Trader Rating: 20 (100%+)
Default

What MIP conversion are you talking about? Or did you mean to type "M2C"?
__________________
Current Racers: AE B6D, Tekno SCT410, Tekno EB48.3
Full Throttle R/C Raceway www.ftrcr.com, Psycho Dog Racing Team, Team Holy Rollers - Greatest RC race team on the planet. Well, at least the team with the best sponsor.
Tekno RC
bds81175 is offline   Reply With Quote
Old 04-07-2016, 07:04 PM   #3372
Tech Elite
 
Join Date: Dec 2011
Location: Raleigh, North Carolina
Posts: 2,256
Trader Rating: 45 (100%+)
Default

Quote:
Originally Posted by weedsnager View Post
Is it true the Hobbywing xerun sct pro can't handle a Hv servo ? I ordered the savox 1268 servo

http://www.amainhobbies.com/rc-cars-...1268sg/p183318
No I run the exact servo with the sct pro and 4000kv combo with no timing and full punch. No issues here. Runs fine.
__________________
Pro-Line/Protoform, HRP Distributing, PTRC Racing, Ho B Max
Antimullet is offline   Reply With Quote
Old 04-07-2016, 07:46 PM   #3373
mkl
Tech Fanatic
 
Join Date: Jul 2011
Posts: 898
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by bds81175 View Post
What MIP conversion are you talking about? Or did you mean to type "M2C"?
Yes, I did, thanks for the correction.
__________________
Tekno SCT410, Tekno EB48, Tekno ET48, X-Ray 808E, TRCE Slash 4x4, Tamiya Lunchbox, Tamiya Frog, Slash 4x4, Axial Wraith
mkl is offline   Reply With Quote
Old 04-07-2016, 08:55 PM   #3374
Tech Addict
 
Josh L's Avatar
 
Join Date: Mar 2015
Location: Greenville VA
Posts: 665
Trader Rating: 1 (100%+)
Default

You should start the 4700 with no more than a punch of 3 and timing set at 0. You can play with it from there, but not much. The largest thing you can do is add a cap pack to keep things cooler.
Cap Pack

Also if your going to run a fan, you should look no farther than the WTF fans.>
wild turbo fan
Josh L is offline   Reply With Quote
Old 04-08-2016, 06:58 PM   #3375
Tech Regular
 
Join Date: Jun 2010
Location: AL/SoCal
Posts: 403
Trader Rating: 19 (100%+)
Default

I just got the aluminum shock caps and wanted to try the standard bladder method. When the cap was screwed all the way down I noticed oil was still leaking from the vent hole. My worry is that air is going to get in when I run it.

Anyone else have this issue?
__________________
AE
TeamOSG is offline   Reply With Quote
Reply


Tags
sct410, sct410.3, short course, short course 4x4, tekno


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 01:06 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net