Tekno RC SCT410.3 Thread
|
|||
#1681
Tech Addict
iTrader: (21)
I'm building a SCT410.3 for my kid to mess with and for some limited track time for me at OCRC (practice only, not worried about class rules). I've decided to try out the 4S route and go with a Tekin Pro 4HD 1850KV motor, HW SCT-Pro ESC, and low-profile 4S battery. What pinion gear do you guys recommend I start with? I used to run a 15 tooth pinion with a HW3656 4000KV 4 pole motor 2S setup on a previous SCT410 I had. I don't know what to start with.
-Al
-Al
#1682
Tech Addict
iTrader: (21)
Thanks for the link Matt. I looked at all of those. I guess I will try some thinner oils with my 6x1.5 pistons and see how it runs. Do you know how PT racing oil converts to associated? Ryan Lutz is running 550 front and 450 rear. From the charts I have seen that equates to about 35 wt front and 30 wt rear for associated oil. Does that sound right?
Thank you!!!
Thank you!!!
https://www.google.com/search?q=shoc...MMoO7A#imgrc=_
#1683
Tech Adept
iTrader: (2)
Most of our setups are for indoor but we are starting to get some outdoor setups too. Our site has a few, the link below might be a good starting point. Since the truck is new, our setups are limited. Check our site every week or so as we are trying to post new setups from our drivers and customers on a regular basis.
http://www.teknorc.com/tekno5/wp-con...se_lowbite.pdf
http://www.teknorc.com/tekno5/wp-con...se_lowbite.pdf
#1684
Ruffdog, I recommend taking a look at the setups on our site. They will give you an idea of changes to make to better suit your track conditions.
http://www.teknorc.com/tekno5/wp-con...eets/SCT410_3/
http://www.teknorc.com/tekno5/wp-con...eets/SCT410_3/
When I try to load the setup sheets all I'm getting is blank sheets, what am I missing?
#1685
There's filled out sheets. And there's blank sheets. The filled out sheets are PDF files that auto download to your phone when you click on them. There's only 3 set up sheets posted.
#1686
I got my 6x1.5 pistons installed. Wow, alot faster action. The suspension moves alot more and seems way more sensitive. I'm thinking it may be too fast, I put 30 weight AE oil in front & back with Black/Green. Im thinking I need heavier oil. I guess I'll find out Sunday!!
30w AE is 350 CST
30w AE is 350 CST
#1687
#1689
Anybody know when the Tekno setup guide is coming out. Really looking forward to that.
#1692
Any one use rpm body mount system , I thought they make one but it's not listed?
or is it the slash one? Also in a pinch the slash body fits pretty close to tekno's hole pattern..
or is it the slash one? Also in a pinch the slash body fits pretty close to tekno's hole pattern..
#1693
#1694
Tech Rookie
#1695
pro 6272-00 proline body mount for sct410.3...Was a little confused this am...lol