Tekno RC SCT410.3 Thread
|
|||
#211
Tech Master
iTrader: (36)
I am running revtech 4800KV with TS160 the best combo that i have. I tried sct hobbywing with 4000KV, Tekin GEN2 with 4300KV, Revtech 4800KV with Orion Votex 8.1 but im not happy with the speed but Revetech 4800KV with TS160/TS120 with same pinion gear i feel like need a wheelie lol.
#212
Tech Legend
iTrader: (294)
I am running revtech 4800KV with TS160 the best combo that i have. I tried sct hobbywing with 4000KV, Tekin GEN2 with 4300KV, Revtech 4800KV with Orion Votex 8.1 but im not happy with the speed but Revetech 4800KV with TS160/TS120 with same pinion gear i feel like need a wheelie lol.
#215
Aluminum brace A, B, C and D ordered!
#216
Looks to me the new towers are stamped are they going to offer cnc milled ones, I bent my original ones pretty fast.
#217
Hey guys, the new rod ends use 4mm thread, not 5mm like the previous kit. I'm going to get the correct lengths up on the first page soon along with a lot of other info, I've just been really busy lately.
As for the towers there will eventually be CNC versions available and most likely carbon fiber as well.
As for the towers there will eventually be CNC versions available and most likely carbon fiber as well.
#218
Tech Apprentice
Join Date: Aug 2014
Location: Germany near famous clay track of RCRT Duisburg
Posts: 63
Still waiting for the kit to become available in Germany...
I decided to switch from SC10 4x4 because of the missing center diff to: Tekno... -.3 .
What rims do the Durango- Boys want to use (17mm SC ???)
Next week 2 races take place at exibition in Dortmund, Germany...
I decided to switch from SC10 4x4 because of the missing center diff to: Tekno... -.3 .
What rims do the Durango- Boys want to use (17mm SC ???)
Next week 2 races take place at exibition in Dortmund, Germany...
#219
Tech Legend
iTrader: (294)
durango guys will be using 17mm rims. part of may be due to the compatiblity of parts between the SCT and the buggy it appears from pics.
Tekno does have that option too, though not sure if it will work on the axle threads of the bigger size from M2C. You will want to ask them if you want 17mm rims.
Tekno does have that option too, though not sure if it will work on the axle threads of the bigger size from M2C. You will want to ask them if you want 17mm rims.
#222
Tech Fanatic
iTrader: (2)
I sent them an email this morning asking if there were plans for beefier towers (I run the buggy towers on my V1) and they said not yet. I too bent one of my original towers early on. I was looking into purchasing the parts needed to create the new geometry, but I may wait to see if anything happens with the shock towers.
#223
Tech Adept
Ya i would really like to see stronger towers as well. I have a few sets of the originals that are bent, no problem though once i went to the cnc towers, and yes i am a bit abusive at times, like when i just have to hit a 30 foot quad section!
#224
Tech Apprentice
Join Date: Aug 2014
Location: Germany near famous clay track of RCRT Duisburg
Posts: 63
durango guys will be using 17mm rims. part of may be due to the compatiblity of parts between the SCT and the buggy it appears from pics.
Tekno does have that option too, though not sure if it will work on the axle threads of the bigger size from M2C. You will want to ask them if you want 17mm rims.
Tekno does have that option too, though not sure if it will work on the axle threads of the bigger size from M2C. You will want to ask them if you want 17mm rims.
Good news:
Preorderd my kit, ETA: end of next week!!!
#225
I was on A main to order something and it said I have a shippable backorder, lo and behold it was the 410.3!! whoohoo,,,should have next Wednesday.