R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

    Hide Wikipost
Old 07-27-2017, 06:29 AM   -   Wikipost
R/C Tech Forums Thread Wiki: Official Tekno RC SCT410.3 Thread
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: Bob Barry
Welcome to the SCT410.3 Wiki!

7.26.17 - BB
In order to run the recommended team setup, you need the following optional parts:
TKR6106 Orange LF Springs
TKR6114 Green LF Springs
TKR6018 composite shock caps (built to emulsion) OR TKR8072 Aluminum Emulsion Shock caps
TKR8027 Shock Stand Offs
TKR6051 8x1.3 pistons(drilled to 1.4mm)
TKR8104 .4 bellcranks
TKR8100 .4 ackerman
TKR5545B HRC Hubs
You also need the Aluminum C Block (others can stay composite)

What option parts should I consider buying with a new kit?
None are required but we recommend the following:

TKR5161 V2 Adjustable Hinge Pin Brace A block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5163 V2 Adjustable Hinge Pin Brace C block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes.

TKR5545B HRC Rear Hubs (L/R, CV or uni, SCT.3/SL) - Improves stability of the rear on mid to corner exit. Allows harder acceleration on corner exit.

TKR6146 - CNC Delrin Shock Cartridge Set

TiNi Shock Shafts
-TKR6004T (front)
-TKR6017T (rear)


What spare parts should I keep on hand?
TKR5020 Hinge Pins (inner, front/rear)
TKR5516 Front Suspension Arms and TKR5515 Rear Suspension Arms
TKR5542 Spindle Carriers - TKR5541B Spindles
TKR6009 Shock O-Ring and Bladder Set (for 2 shocks)

Tips and Tricks

List of Vehicle Setup Adjustments and Build Tips can be found here. There are several videos and articles detailing the building of shocks, diffs, camber links, etc.

Setup Sheets:
Setup sheets for all Tekno RC vehicles can be found here. Please be sure to try our recommended setup. It works very well on most tracks.

Warranty Policy:
Tekno RC is the only company in the industry that will give 50% off of parts if returned to them using the General Warranty return policy found on their website. The parts can be lightly used or completely abused, as long as the part is still being produced it's covered!

Piston Drills:
Some of our setups recommend using pistons that are enlarged. For instance 4x1.9 or 3x2.0. To drill the pistons we recommend the following:
GMK Supply Piston Drill Set
16PC Metric Bit Set Metric Sizes 2.00 to 3.00 MM.

Print Wikipost

Like Tree67Likes
Reply
 
Thread Tools Search this Thread
Old 08-13-2015, 11:18 AM   #1906
Tech Regular
 
Jason Baliban's Avatar
 
Join Date: Jul 2014
Location: Eastern PA
Posts: 314
Default

I have a question on drilling for vented setup.

I know i have to drill the bleeder hole. What i am confused about is where to drill the vent? Does the hole go out the bleeder for emulsion or does it go straight up into the cap?

Thanks so much!

jB
__________________
High Sundry Productions

B5M | MBX-7Re | T5M | TC3 | RC10 "Graphite"
Jason Baliban is offline   Reply With Quote
Old 08-13-2015, 12:20 PM   #1907
Tech Addict
 
Join Date: Dec 2009
Location: In a VAN down by the RIVER
Posts: 746
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by Jason Baliban View Post
I have a question on drilling for vented setup.

I know i have to drill the bleeder hole. What i am confused about is where to drill the vent? Does the hole go out the bleeder for emulsion or does it go straight up into the cap?

Thanks so much!

jB
Hole goes out through where the bleed screw goes (leave screw out for vented).
__________________
Sofa King Racing
Sofa King is offline   Reply With Quote
Old 08-13-2015, 12:31 PM   #1908
Tech Regular
 
Jason Baliban's Avatar
 
Join Date: Jul 2014
Location: Eastern PA
Posts: 314
Default

Quote:
Originally Posted by Sofa King View Post
Hole goes out through where the bleed screw goes (leave screw out for vented).
I thought that made the most sense, because i suppose you could close it up if you wanted with a screw for non vented. The manual isnt super clear about it though.

Thanks!

jB
__________________
High Sundry Productions

B5M | MBX-7Re | T5M | TC3 | RC10 "Graphite"
Jason Baliban is offline   Reply With Quote
Old 08-13-2015, 04:32 PM   #1909
Tech Adept
 
Join Date: Jan 2015
Location: Reno, Nv.
Posts: 115
Trader Rating: 2 (100%+)
Default

Does anyone have any tips on how to free up the aluminum pivot balls for the sway bar assembly? My new ones are pretty stiff.
red100076 is offline   Reply With Quote
Old 08-13-2015, 06:04 PM   #1910
Tech Addict
 
Josh L's Avatar
 
Join Date: Mar 2015
Location: Greenville VA
Posts: 665
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by red100076 View Post
Does anyone have any tips on how to free up the aluminum pivot balls for the sway bar assembly? My new ones are pretty stiff.
Just do what the heli guys do and put the pivot ball In a drill chuck and blip the drill a few times while holding the ball link stationary as to spin the ball inside the end a few times. Be careful not to over do it though as it will rapidly heat and can over melt the plastic making it to loose permently. It works awesome though and it beats doing the pinch method with pliers because it perfectly seat the ball in the exact shape it needs. Just make quick fast blips, do not keep spinning it.

Here I found a video ball link sizing
Josh L is offline   Reply With Quote
Old 08-13-2015, 09:57 PM   #1911
Tech Adept
 
Barillms's Avatar
 
Join Date: Apr 2015
Posts: 221
Default

Quote:
Originally Posted by red100076 View Post
Does anyone have any tips on how to free up the aluminum pivot balls for the sway bar assembly? My new ones are pretty stiff.
Just put some oil lightly on them when you ckean/ tear down.
I use synthetic fishing reel oil.
__________________
RC Juice
Dialed RC Hobbies
HobbyStar
Savox Servos
HRP - Hobby & Recreation Products
Barillms is offline   Reply With Quote
Old 08-14-2015, 03:42 AM   #1912
Tech Apprentice
 
Join Date: Jan 2015
Posts: 71
Default Thanks for the spring and pinion recommendations.

I am putting the kit together now. Don't know if I'll have it ready for this weekend but I'm not going to rush it.

Rich
FunStuff is offline   Reply With Quote
Old 08-14-2015, 09:07 AM   #1913
Tech Adept
 
Join Date: Jul 2015
Posts: 168
Default

I take it as most people are using a 17-19t pinion gear?

I will be using a turnigy 4850kv 4 pole motor with Hobbywing XERUN SCT PRO Brushless Sensored ESC 120a so I should get something similar for the pinion gear?

also, my shocks seems to be leaking oil. the threaded areas are coated with a thin layer of oil. any recommended brands/viscosity to refill it?
novaris is offline   Reply With Quote
Old 08-14-2015, 06:51 PM   #1914
Tech Rookie
 
Join Date: Dec 2014
Posts: 1
Default Turnbuckles

Do the Team Durango turnbuckles have to be modified or are they a direct fit to the sct410.3?

Part# TD310215
Silvergoat06 is offline   Reply With Quote
Old 08-14-2015, 07:00 PM   #1915
Tech Elite
 
rcgod's Avatar
 
Join Date: Apr 2002
Location: Sacramento, CA
Posts: 3,045
Trader Rating: 27 (100%+)
Default

Quote:
Originally Posted by novaris View Post
I take it as most people are using a 17-19t pinion gear?

I will be using a turnigy 4850kv 4 pole motor with Hobbywing XERUN SCT PRO Brushless Sensored ESC 120a so I should get something similar for the pinion gear?

also, my shocks seems to be leaking oil. the threaded areas are coated with a thin layer of oil. any recommended brands/viscosity to refill it?
4850kv should be in the 15 to 16 range.
__________________
Dialed RC Hobbies
rcgod is offline   Reply With Quote
Old 08-14-2015, 09:42 PM   #1916
Tech Adept
 
Join Date: Jul 2015
Posts: 168
Default

Quote:
Originally Posted by rcgod View Post
4850kv should be in the 15 to 16 range.
thanks

what kind of motors are using the 17-18t pinions?
novaris is offline   Reply With Quote
Old 08-14-2015, 09:49 PM   #1917
Tech Elite
 
rcgod's Avatar
 
Join Date: Apr 2002
Location: Sacramento, CA
Posts: 3,045
Trader Rating: 27 (100%+)
Default

Quote:
Originally Posted by novaris View Post
thanks

what kind of motors are using the 17-18t pinions?
Pro4 4300HD and hobbywing 4000. On the 4000 I've seen guys run a 19t.
__________________
Dialed RC Hobbies
rcgod is offline   Reply With Quote
Old 08-14-2015, 11:07 PM   #1918
Tech Adept
 
Barillms's Avatar
 
Join Date: Apr 2015
Posts: 221
Default

Quote:
Originally Posted by novaris View Post
thanks

what kind of motors are using the 17-18t pinions?
The 4000kv motors run around a 17 or 18t. I ran on big outdoor track and an 18 wasn't necessary with my old motor which was a 4150kv. I now run a 4400kv with a 15t. I temped it at 152 last race and that's with a motor fan.
__________________
RC Juice
Dialed RC Hobbies
HobbyStar
Savox Servos
HRP - Hobby & Recreation Products
Barillms is offline   Reply With Quote
Old 08-15-2015, 10:36 AM   #1919
Tech Adept
 
Join Date: Jul 2015
Posts: 168
Default

any comments on savox 1258tg?

the lhs does not have the 1256 and says 1258 is newer and better
plus it's the only one with a decent price tag there
novaris is offline   Reply With Quote
Old 08-15-2015, 11:34 AM   #1920
Tech Addict
 
Dan.J's Avatar
 
Join Date: May 2014
Location: S/W lower Michigan
Posts: 748
Trader Rating: 21 (100%+)
Default

Quote:
Originally Posted by novaris View Post
any comments on savox 1258tg?

the lhs does not have the 1256 and says 1258 is newer and better
plus it's the only one with a decent price tag there
Speed is fine but not really enough torque IMO. I would want 200+on the torque for this truck, the ones I run are over 400, overkill yes but..........
__________________
Tekno EB48.3/Tekno EB48SL/Tekno SCT410.3
Dan.J is offline   Reply With Quote
Reply


Tags
sct410, sct410.3, short course, short course 4x4, tekno


Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
astarback
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:18 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net