platgof

iTrader: (4)

I have heard the Novak makes great motors, but not esc's. Try to swap out the esc and see what happens.

lowspark

iTrader: (7)

Start over from step one... you mentioned the problem occurred when you added a new model to your radio.

1.Bind the radio and receiver
2. Calibrate the ESC to the radio...

simplest solution is usually the one that works...

lowspark

iTrader: (7)

forgot to mention...

reset any radio adjustments (throttle, brakes, expos...) to zero before binding..

imac6471

iTrader: (7)

I didnt even think of recalibrating the radio and esc. Turns out, that was the problem..well part of it. It would just randomly start driving. I bound my dx3.0 and now everything is perfect. Since its been about 2 weeks since ive really driven it, i beat the holy crap out of it in the back yard. Now off to the track.this weekend

kevinsreell

iTrader: (7)

Before using your DX3C for racing, I would try it extensively in another car. My DX3C that has issues became progressively worse over about a month period. I re-set it, rebound to multiple models, and finally put it to rest on a shelf. I also took it apart twice to check for loose connections, bad solder joints or anything else that may have caused this. R.I.P.