urban

Do any of you know any one that races with mm 2200 and is successful?

tc5 man

I used that setup for a little bit if you want to race it you gota turn down the punch control for sure ! In a 1/8 E buggy though the motor is pretty heavy but its smooth if you tune it .

ta_man

iTrader: (168)

Friend of mine uses that setup in a Losi 8 2.0 and does well with it. He's not a world beater because he occasionally makes mistakes but that's his driving, not the motor/esc combo.

rcus3r

I do ok with it - mm 2200 with Hobbywing 150A. It has a lot of power, runs cool. It is heavier than the Tekin stuff, which most run.

But it is sensorless. My track is pretty technical, lot of breaking. It lacks some of that instant throttle after heavy breaking. It takes a moment. I have to anticipate getting on the throttle, if that makes sense.

On a big open track it does pretty good.

rcus3r

If you're serious, get the right setup. Get a sensored setup.

I have other trucks I race regularly. This one is for fun, and as a backup if one of the others is broken.