exage94

Hey guys ,

can anyone tell me the length for the front and rear hing pins ? I dont finde a information...

THX

werner sline

will check for you
what do you want to do ?

rp180sx

Has anyone tried the rc8b3 predator body on the mbx7r eco? I am using pro-line phantom body but it does not clear my 4s lipo very well. And it has cracked over the battery side of the chassis.

hairymuffin

iTrader: (105)

Yea it fits, same phantom but made for ebuggy

rp180sx

Great, thanks for the quick reply. What body is your son using ?

werner sline

front hingepin is 63mm long and the rear is 65mm

wittyname

iTrader: (4)

Do any universals from other manufacturers fit the car ? I don't want to carry $50 worth of spares if I know I may be able to get another brand at the LHS if something goes wrong . IF I have to I will , just don't want to, The associated car is so similar , it has to be close right ?

werner sline

some do swap front arms from the mbx7 to the asso

most 1/8 buggies can share universals but you have to be ready to change the hex too ( for example mugen uses 3mm pins and a hobao hyperstar uses 2.5mm pins in the hex )

but do you have to take universals to the track ? you might bend one in a crash but that's not a part I would take to the track

werner sline

mbx7r eco flying around :

+ YouTube Video

+ YouTube Video

DaveG28

iTrader: (65)

Hi guys,

What servo horns are you all using? I am struggling to find ones which leave enough gap underneath for the mount?!

JJG690

iTrader: (5)

I'm currently running a Tekno servo horn on mine

rp180sx

I am using a protek 25t servo horn on a savox 2274sg servo.

ddick

hi i am new at E buggy. Only drive nitro buggy´s and have some questions.
The only thing i knew is that it will be a Mugen 7R eco


i not know which combo to buy.

1) Hobbywing Xerun XR8, Tekin 1900 or TORO X8S 2150

What the difference of the tekin and the Toro ? not mean the company

2) Tekin Gen 2 ESC and Tekin 1900


3) battery 4 s or 2 x 2s

Thanks

Watkins4x

iTrader: (6)

So I have the MBX7 Eco and it's still in good shape. I just ordered the shocks and rear tower from the R to put on mine. What springs are you guys running? I had to order the Nitro shocks from Dollar Hobbyz which I know will have the wrong springs.

hairymuffin

iTrader: (105)

We run black 10.25 rears the most and 9.25 fronts.. The kit silver springs work well, some prefer the silvers over the black... Stock 8h pistons