racingnewb

iTrader: (7)

Will the smc 6500 mah lipo fit in the 7r eco?
Thanks for any help

Bburns

iTrader: (4)

Yes, I used it but layed it on its side so the wires were on the side. I also used the little battery stop if you were using 2 2s pack. I mounted it in the front of the tray. Kept battery from splitting.

racingnewb

iTrader: (7)

Thanks man, good info since the smc 6500 are the only 4 cells I have

racingnewb

iTrader: (7)

I gave in and bought a used one off here. It was a tough choice whether or not to buy a new kit. I bought a used one w/ aluminum rear hubs and a fair amount of spare parts.(arms, a,b,c,d plates, upgraded center shafts, spare f/r shafts and a bunch of little stuff) I may receive my package tomorrow, I can't wait to first see what I bought as well as putting it on the track. I got it off of bighen and so far he has been great to deal w/ and shipped it the same day payment was received.

Thunder Trail

iTrader: (66)

You will like it. have fun.

racingnewb

iTrader: (7)

Just got it today, it appears to be in great shape. I shouldn't have any problems putting it on the track next weekend.

racingnewb

iTrader: (7)

What pinions do you guys run? such as brand and tooth count. I believe I have a stock spur.

turtle189

Just had my new 7r eco out today for the first time all I can say is wow what a great car. Only chage from the setup I was using was up 50 cst front and rear shock oils and dialed!

JPucko

iTrader: (2)

I've got a Robinson racing 15t pinion, 46t metal spur. It depends what motor you go with . I think the stock spur is 44t, not 100% though.

rider313

iTrader: (94)

stock is spur is 46T and stock pinion supplied with kit is 14T.

dmcguire

iTrader: (38)

I'm running an SMC 1900kv in truggy and buggy, stock spurs and a 16t pinion at most tracks. On 4s. Temps are great even after a 10min main.

All Mugen pinions and they're holding up great. Best price around seems to be Nitrohouse

racingnewb

iTrader: (7)

Thanks, good info

deceit

iTrader: (-1)

How do you like the SMC 1900?

racingnewb

iTrader: (7)

Rather then spending 35 bucks on a 42t ring gear I bought a complete mgt7 diff. I checked the part numbers and everything seems to match up. Has anybody tried the mgt7 diff? I bought the 12 t pinion gear separate. Thanks, the buggy I bought came with a few sets of springs but most don't have the little black tag on them. I'm gonna have to do some research to check diameter/coils to see whats what. I won a shock duplicator. I thought about putting the springs on the shocks w/ no oil in them to see if I can match these springs up on the duplicator.

hairymuffin

iTrader: (105)

Same f/r diffs on the gt