set up for So CAL raceway
Can anyone provide me with a starting setup for So Cal raceway?
I have a losi XXX-T.... thanks |
Pretty much everyone is running the same setup in their MF rigs. I've been running the same setup for over a year. I'm having the most success with the BK setup.
Front: 32.5 #57 .125 internal limiter mounting inside on tower, inside on arm 2"blue spring links @ 3B w/2 washers Rear: 32.5 #55 no limiter mounting outside on tower, outside on arm 2.75" yellow spring links @ 1A carriers in middle Start there....hope it helps! |
?
you should ask Slim, he would be helpful for your set up. if not dont know what to say, besides testing it out on the track.
|
FRONT
47 piston 100 wt oil black springs trinity shock tower outside inside arm 3 d camber link 16 washers rear wing in front shocks collars unscrewed as far as possible |
nice jackazz
|
Hum...............
|
The bk setup is good, but I felt it was a bit more hooked up with some changes in the rear. I don't mean to step on toes, but if you're interested in trying a few changes, then here's another option.
Front: Same as the BK blue spring setup Rear: Oil: 35wt Piston: 56 Spring: Red Shock Location: Next to inside on Tower...Inside hole on A-arm Camber rod Location: Middle in Tower....A-Hole in Hub This felt more hooked up than the standard setup and it seemed like you could drive the car harder which = faster. Also, nothing is going to be hooked up without relatively new M3 holeshots with "non-blown out foam" so make sure your meats are hooked up. Hope this gets you dialed Jeremy |
thanks
thanks for the setups.... cant wait to hit the track!
|
All times are GMT -7. It is currently 07:07 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.