Team Associated T5M Discussion
#1081
Tech Regular
Theres a offroad carpet track opening in my area so when I built the kit I used 45w front, 40w rear for oil and lowered ride height other than that it was kit setup. After driving it yesterday back to back with my b5m that's setup for dirt I'm wondering if I like the oil I chose. I know the setups will be hard to come by for a while but if anyone plans to run on carpet please post setups that do or don't work.
#1082
Tech Master
iTrader: (32)
The 5mm hexes are to be ran with the +4mm C block.
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
#1083
Tech Champion
iTrader: (170)
The 5mm hexes are to be ran with the +4mm C block.
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
#1084
The 5mm hexes are to be ran with the +4mm C block.
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
Details on RC10.com
http://www.teamassociated.com/parts/details/91608/
Cool! Welcome to the dark side!
#1085
...
#1086
Tech Master
iTrader: (77)
Those are for the buggy. NOT the truck....and since when is 4mm narrower per side just 'a little narrower'? That's 8mm overall.
The correct ones are actually in stock at tower.
(need x1) http://www3.towerhobbies.com/cgi-bin...?&I=LXEZWD&P=7
(need x2) http://www3.towerhobbies.com/cgi-bin...?&I=LXEZVT&P=7
The correct ones are actually in stock at tower.
(need x1) http://www3.towerhobbies.com/cgi-bin...?&I=LXEZWD&P=7
(need x2) http://www3.towerhobbies.com/cgi-bin...?&I=LXEZVT&P=7
#1092
tower eta is late apil? it sold out fast
#1093
Tech Master
iTrader: (77)