Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
Tech Initiate
What is the difference between Redwork shop laydown gearbox and Shapeways?
Come see me this Sunday. I'm usually upstairs with Troy, Ryan, and Kiely. I'm running the AC/RC transmission and kept the price low by doing the motor plate and battery strap at home. Conversion cost me $35 and a couple hours in the basement.
Tech Fanatic
iTrader: (8)
Anyone run the Lite chassis in mod? I picked up a second kit for spares and was going to off the chassis on Ebay as I only prefer to run mod. Knock on wood, but a chassis isn't something I've ever needed to have a spare of.
Tech Champion
iTrader: (22)
Yeah I'm usually chasing you down haha. I'll talk with ya Sunday because I got the impression your car was heavily customized. Wasn't sure what you had would work on a stock kit.
Tech Fanatic
Switching from 4 gear to 3 gear transmission. If I'm happy with my current 4 gear setup do I need to change my setup when switching to the 3 gear setup?
Tech Champion
iTrader: (22)
The biggest thing the mod guys have been telling me when they switch is they all used to run 3x1.4 in the frontn and 1.6 in the rear. Now they switch that around and put the 3 hole in the rear. Also we're just starting to run the +2 pills, raised spindles, and inside on the rear shock tower. Seems to be a nice starting point for our medium bite tracks.
Does any one sell a kit to go from the 3 gear to a 4? I searched but did find much info on it.
Tech Fanatic
iTrader: (19)
You just need the motor plate, gear cover,four gear transmission case, idler gear, bearings, and idler gear shaft. They don't sell an all in one kit.
1x 91428 Std motor plate or 91546 LW Blk plate or 91547 LW Blue Plate
1x 91435 gear cover
1x 91429 Idler gear
1x 91011 Idler shaft
2x your favorite variety of 5x10 bearings
BD
Tech Elite
iTrader: (15)
Hey guys,
Which setup sheet do you recommend for indoor high bite clay track. We can use slicks now. I think my setup is good but want to fine tune .
traction is so good we traction roll on turns.
Thanks in advance!
Which setup sheet do you recommend for indoor high bite clay track. We can use slicks now. I think my setup is good but want to fine tune .
traction is so good we traction roll on turns.
Thanks in advance!
Regional Moderator
iTrader: (13)
If you think your car is pretty good now, why go and put someone else's setup into it? Fine tune what you have now. What is or isnt it doing that you want to change?
edit : oredered
Last edited by a1; 12-15-2015 at 07:32 PM.
Tech Master
iTrader: (16)
Kody's Setup
Shock package may be something to try.
I'll be at Bumps this Sunday with my brand new B5m CE (painted dark blue with white stripe and side wing panels), hopefully practicing it tomorrow night for the first time.
Tech Elite
iTrader: (15)
I want it to drive as easy as possible so I can just focus on the lines.