speed passion speedcontrols
#2
Tech Addict
for me, I have never had a problem with S/P controllers and motors. They are among the smoothest controllers on the market.
#4
Tech Elite
iTrader: (39)
Ive owned Tekin, Novak, LRP, and have driven pretty much all the latest and greatest out there and Speed Passion is right there with them. In fact, I have the Reventon Pro in my Kyosho RB6 and its super smooth. I have not tried the motors yet. My only gripes are that its a bit bulky and heavy and the on/off switch is on the esc body. I would say similar in size to the LRP Flow or Orion R10.
#7
speed passion
Thanks guys for coming in on the speed control. I just haven't seen much on them. And I got a friend with a b44.2 with a speed passion speed control an 7.5 motor.that damn thing is fast!!!! Faster than lou-lou/ x-god.and temps was very low. 132 temp and that was from a fresh charge to lipo cut off.
Hahahaha.
Hahahaha.
#8
speed passion
Have been running the reventon software from an iPhone with no issue. Run a GT pro in my SCTx4 with the Viper 4pole. The only problem I've had, I created, don't hook the battery up backwards. Burnt it up!
#9
Tech Elite
iTrader: (17)
I run the Rventon R on my T4.1 FT and it is flawless. I tun RS Pros on my 4.2 and DEX410 and they heat up whereas the Reventon R runs cool all day long and has plenty of punch and is really smooth on power and I like the braking too.
I run the V3 7.5 on my 4.2 with the RS Pro and is flat out smokes! Not int he bad way. LOL
I pride myself on my soldering skills as I do the cleanest jobs but the the bullet connectors on the end bell of SP Motors make for the cleanest install of any motor. The only thing I think would make it better is if they would relocate them so they all reside on the same edge. They also have 2 or 3 different timing sensor units for more power as needed. Should be a Green a Blue and a Yellow if I remember.
I run the V3 7.5 on my 4.2 with the RS Pro and is flat out smokes! Not int he bad way. LOL
I pride myself on my soldering skills as I do the cleanest jobs but the the bullet connectors on the end bell of SP Motors make for the cleanest install of any motor. The only thing I think would make it better is if they would relocate them so they all reside on the same edge. They also have 2 or 3 different timing sensor units for more power as needed. Should be a Green a Blue and a Yellow if I remember.
#10
Tech Legend
iTrader: (294)
the SP Gt2.0 Pro's have been workhorses in a variety of vehicles I own, from light 1/12 pan car usage to 1/10 4x4 SCT (Tekno) usage with 550 4 pole motors.
As it sits now, I went VTX8 in my 1/8 and 1/10 4x4 stuff to get a bit more power, but, since it is a 1/8 esc, it should be lol. But, for a workhorse ESC that has a lot of great features, and a handheld programmer, excellent speedo.
As it sits now, I went VTX8 in my 1/8 and 1/10 4x4 stuff to get a bit more power, but, since it is a 1/8 esc, it should be lol. But, for a workhorse ESC that has a lot of great features, and a handheld programmer, excellent speedo.
#11
Tech Addict
iTrader: (6)
I have a Dex210 with an 8.5 speedpassion and the R speedo. Neither have ever gotten about 120degrees
I have a DESC210 with a 7.5 speed passion with the Pro speedo I almost burnt it up by connecting the motor wires wrong but since then it runs very cold
The only thing I don't like is a lot of the software doesn't have reverse
I have a DESC210 with a 7.5 speed passion with the Pro speedo I almost burnt it up by connecting the motor wires wrong but since then it runs very cold
The only thing I don't like is a lot of the software doesn't have reverse
#12
Tech Master
iTrader: (35)
I have a Dex210 with an 8.5 speedpassion and the R speedo. Neither have ever gotten about 120degrees
I have a DESC210 with a 7.5 speed passion with the Pro speedo I almost burnt it up by connecting the motor wires wrong but since then it runs very cold
The only thing I don't like is a lot of the software doesn't have reverse
I have a DESC210 with a 7.5 speed passion with the Pro speedo I almost burnt it up by connecting the motor wires wrong but since then it runs very cold
The only thing I don't like is a lot of the software doesn't have reverse
When I wasn't running boost or can timing Mine ran exactly the same. I burned it up by adding about 20* on the can with 25*+/- in the ESC & running a full pack (25+ minutes) with out adjusting gearing. It was blindingly fast, right up till it thermaled & never came back on.
Other than me being stupid with them, I have nothing bad to say about SP ESC's.
#14
SP esc's & motors are great and if you have any questions or issues, Solara aka Howard is very helpful with tips and infos.