nitro sport wont start
im new to nitro's so go easy :batman: i just bought a sport off ebay and it wont start. it has the trx. 15 w/ pull start. i put nitro in it and pulled and pulled. nothing. turned the valves and still nothing. do i need a glow ignitor with a pull start? what am i doing wrong :confused:
|
yes u do
|
You need a glow igniter for any glow engine.
http://www.teamassociated.com/shusti...gniter.300.jpg Put this on the glow plug, and pull the starter. If you don't see fuel running through the lines, take off the igniter, put your thumb over the muffler opening, and pull the cord a few time. Once the fuel reaches the carbuetor, put the igniter back on the glow plug, and remove your thumb from the muffler opening. Then after the first or second pull, the engine should start up. If not, check and make sure your engine is tuned properly and the compression is good. The flywheel should be difficult to turn by your finger. |
thanks guys
|
Thai3g_Eclipse does that charger plug into the end of the ignitor to charge the bat?
|
yes it does
|
how long does it take to charge?
|
i just leavn mine overnight and im good for about 30 starts
|
Originally Posted by wlvrn
im new to nitro's so go easy :batman: i just bought a sport off ebay and it wont start. it has the trx. 15 w/ pull start. i put nitro in it and pulled and pulled. nothing. turned the valves and still nothing. do i need a glow ignitor with a pull start? what am i doing wrong :confused:
|
i bought the dubro e/z glo glo-plug ignitor, the one that has the test button on it.
|
All times are GMT -7. It is currently 02:36 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.