TLR 22 2.0 Race Kit: 1/10 2WD Buggy thread
#4156
Tech Champion
iTrader: (34)
Spindles, caster blocks, arms, rack and shock seals only.
Car is great, yeah, could be even better with springs, shafts, plastic shock parts etc... but for a few bucks it was well worth doing and I'm very happy to be racing this car still.
It's better than ever.
#4158
I am considering purchasing a 22 2.0. I am coming from a B4.2 and want to try a different rear motor and a mid motor car that isn't going to be too costly. Does anybody have both a B4.2 and a 22 2.0? What are the differences in driving characteristics between the two when ran in rear motor? Without having to search through hundreds of pages of threads, will a full sized lipo fit in the 22 2.0 in both rear and mid motor configuration? Also, will my front and rear JConcepts and Team Associated B4.2 rims fit on the 22 2.0? And are the front 22 2.0 hexes 10mm or 12mm?
Thanks in advance,
Mark
Thanks in advance,
Mark
#4159
Tech Champion
iTrader: (22)
I am considering purchasing a 22 2.0. I am coming from a B4.2 and want to try a different rear motor and a mid motor car that isn't going to be too costly. Does anybody have both a B4.2 and a 22 2.0? What are the differences in driving characteristics between the two when ran in rear motor? Without having to search through hundreds of pages of threads, will a full sized lipo fit in the 22 2.0 in both rear and mid motor configuration? Also, will my front and rear JConcepts and Team Associated B4.2 rims fit on the 22 2.0? And are the front 22 2.0 hexes 10mm or 12mm?
Thanks in advance,
Mark
Thanks in advance,
Mark
full size fits in rear motor but not mid. Mid is shorty or saddles. Rear rims fit, front don't. I believe they are 10mm hexs.
#4160
Tech Master
iTrader: (3)
I am considering purchasing a 22 2.0. I am coming from a B4.2 and want to try a different rear motor and a mid motor car that isn't going to be too costly. Does anybody have both a B4.2 and a 22 2.0? What are the differences in driving characteristics between the two when ran in rear motor? Without having to search through hundreds of pages of threads, will a full sized lipo fit in the 22 2.0 in both rear and mid motor configuration? Also, will my front and rear JConcepts and Team Associated B4.2 rims fit on the 22 2.0? And are the front 22 2.0 hexes 10mm or 12mm?
Thanks in advance,
Mark
Thanks in advance,
Mark
EDIT: 12mm hex rear, smaller hex up front.
Last edited by AndrewTom; 11-25-2013 at 07:10 PM.
#4163
Tech Master
iTrader: (3)
looks like there is a difference in the offset as well.
http://prolineracing.com/wheels/velo...llow-wheels-22
http://prolineracing.com/wheels/velo...yellow-wheels/
Edit: ^ thanks wildcat,
#4165
got money to get my tekin rs 2 esc with 8.5
#4166
Thanks for the quick replies guys!
#4168
#4169
Tech Apprentice
iTrader: (4)
Are there plans to sell the TiCn Threaded King Pins as a separate P/N? Snapped one this weekend, and the only way to get them is by purchasing the hinge pin set.
http://www.amainhobbies.com/product_...-Hinge-Pin-Set
http://www.amainhobbies.com/product_...King-Pin-Set-2
http://www.amainhobbies.com/product_...-Hinge-Pin-Set
http://www.amainhobbies.com/product_...King-Pin-Set-2