66LikesHot Bodies D413 1/10 4WD Buggy
07-18-2014, 01:31 PM
#3706
I used the associated b5m plastic caps ,plastic standoffs and a yokomo shock cap 0 ring I had laying around it worked fine, I think any standard 12 mm shock oring will work Do not use the aluminum associated caps they will not thread all the way down .
07-18-2014, 03:51 PM
#3707
JP would it be possible to see a pic of your RSX? I am doing my wiring right now and am a freak about clean looking and the capacitor is a pain, with my RS gen2 in my B5M I layed it over towards the body but if run the fan on the RSX it must go behind your help is much appreciated!
Last edited by DWheels; 07-18-2014 at 04:02 PM.
07-18-2014, 05:11 PM
#3708
Tech Adept
heres race 4 in the wednesday's point series ....i upped front shock oil to 45w and blue associated springs....was so nervous you wouldnt believe it...had 3 other racers that can be very fast....i had pole, but nerves got the best of me, and i overshot the triple by a mile, and then the tabletop...landed me number 6 out of 7 arghh...but luck smiled upon me and i ended up winning....this would not have been possible without the D413 and josh's superb setup...thanks !
during practice before the race i tried new HB pink beams/fullslot...it added time to my laps, so i went back to rear tires that are nearly bald in the middle, and fronts where you can barely feel the ribs, this gave me the push i am used to and lap times fell, i managed a 15.3sec inbetween low 17's, and then a 15.9...mondrell with his crazy fast b44.2 (with gear diff's) managed a 15.6 during qualifying !!!
ohh and dirt webs megasoft are almost as good as the beams, now that the whole of USA is out of Beams arghhhh !
on monday the track will be changed YAY !
during practice before the race i tried new HB pink beams/fullslot...it added time to my laps, so i went back to rear tires that are nearly bald in the middle, and fronts where you can barely feel the ribs, this gave me the push i am used to and lap times fell, i managed a 15.3sec inbetween low 17's, and then a 15.9...mondrell with his crazy fast b44.2 (with gear diff's) managed a 15.6 during qualifying !!!
ohh and dirt webs megasoft are almost as good as the beams, now that the whole of USA is out of Beams arghhhh !
on monday the track will be changed YAY !
| + YouTube Video | |
07-18-2014, 05:20 PM
#3709
thanks so much, yup that's kinda naturally where it ended just like yours! although I wish I could have seen your picture before I soldered I may have layed the wires on the posts, but I always like to use shrink tube, hopefully I kept everything tight enough to fit under the body which I don't have (out being painted) thanks again for your help!
07-18-2014, 05:22 PM
#3711
07-18-2014, 09:48 PM
#3715
Tech Adept
Here's how Ty does it.
07-19-2014, 08:53 AM
#3720
Just ordered mine, thanks guys