66LikesHot Bodies D413 1/10 4WD Buggy
10-20-2016, 12:33 PM
Tech Fanatic
iTrader: (2)
10-20-2016, 07:30 PM
Thought I would share my latest paint work for my 413.....
10-20-2016, 08:18 PM
where do you guys buy parts?
10-20-2016, 08:20 PM
Very good out of the box. I only recommend the Exotek steering rack and center diff cap with spur gear. As another option you can buy the d216 shock pistons so you dont have to drill a set of 2x1.6 and 2x1.7 pistons. If you run that setup. I like tge 12mm hexes so i picked up Avids set but not a must have.
BTW.. I am trading my roller with a used one and the trader said it's box stock setup. Whats the box setup and what setup is good for clay medium to high bite track?
10-20-2016, 09:04 PM
10-20-2016, 09:09 PM
You don't need exotek spur but if you must have go to exotek website. Stock set up 10 100 10 diffs and 4 hole pistons. More info in manual. I like 2014 reedy set up and gunsmoke for medium bite. I stated using 50k center to reduce wheel spin.
10-20-2016, 09:41 PM
Tech Initiate
Where can we get the replacement differential o-rings part number 66595?
10-22-2016, 05:27 AM
What would you guys say with parts support? Is it harder to find parts or has it gotten better?
I see Avid makes a chassis but it looks like its always out of stock. Did they quit making it or is it just in high demand? Any other companies make chassis?
Finally got my new to me buggy and I must say these are beefy.. Very pumped about the design and over all look. Havent been able to run since it cam missing the hex pins but I want to rip apart and set it up to a spec so I know where to go from there..
I see Avid makes a chassis but it looks like its always out of stock. Did they quit making it or is it just in high demand? Any other companies make chassis?
Finally got my new to me buggy and I must say these are beefy.. Very pumped about the design and over all look. Havent been able to run since it cam missing the hex pins but I want to rip apart and set it up to a spec so I know where to go from there..
10-22-2016, 06:39 AM
10-23-2016, 02:09 AM
Tech Fanatic
iTrader: (2)
10-23-2016, 05:27 AM
10-23-2016, 09:41 AM
Tech Fanatic
iTrader: (2)
P-5 is a standard metric size, any brand works.
10-23-2016, 08:33 PM
Has anyone had any luck making changes to this buggy to be competitive on carpet? Or Im I doomed to get a xb4.
10-24-2016, 12:00 PM
PARTS
For all of you guys running this buggy, I found the best 3 sources for parts are,
AMAIN
TOWER HOBBIES
LOSI PARTS HOUSE.
I am yet to not find a part between these 3 fine retailers.
Thanks and good luck!
AMAIN
TOWER HOBBIES
LOSI PARTS HOUSE.
I am yet to not find a part between these 3 fine retailers.
Thanks and good luck!
10-24-2016, 12:57 PM
I run HB +6mm chassis and Extended top decks along with 15 degree caster blocks, HB Red springs front and Rear. with thick oil. Rest is just tweaking stock setup