R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Like Tree4Likes
Reply
 
Thread Tools Search this Thread
Old 01-30-2013, 12:07 AM   #1
Tech Elite
 
Join Date: May 2006
Posts: 3,527
Trader Rating: 13 (100%+)
Default Official TLR TEN-SCTE 2.0 Kit Thread

Thats right folks, its finally here...the truck you've been waiting for. I will update this page as time goes on, but this will be a good start!


http://www.tlracing.com/Products/Def...rodId=TLR03000


Chassis Call-Out

1. 3mm HARD-ANODIZED, 7075 Machined-Aluminum Chassis Plate
2. Heavy-duty 4mm tie rods with captured ends
3. HARD-Anodized aluminum threaded shocks
4. Updated front and rear carbon fiber shock towers
5. Updated motor and center diff placement
6. Performance battery mounting system
7. Updated diff cases
8. Two complete wheel sets
9. 12mm aluminum wheel hexes
10. Hi-performance body
11. Ti-Nitride shock shafts and hinge pins
12. Hard-Anodized Aluminm, Adjustable pivots
13. Aluminum bleeder shock caps
14. ALUMINUM CHASSIS BRACES

Features
Lightweight, Anodized, Hard Aluminum ChassisThe chassis plate is machined from 3mm thick aluminum alloy and 7075 hard-anodizedfor durability. The parts layout on the chassis has been updated to shift the weight bias lower and farther back for more consistent handling and faster lap times.

Heavy-Duty 4mm Tie Rods with Captured EndsThe tie rods have been machined to handle the punishing impacts associated with short course racing. The captured rod ends prevent accidental disconnection.

Anodized, Aluminum-Threaded ShocksThe big-bore, 12mm aluminum shock bodies are hard-anodized to resist wear. They're equipped with threaded shock collars that make precise pre-load and ride height adjustments easy.

Updated Front and Rear Shock TowersBoth shock towers offer extensive camber adjustments. Extra shock mounting positions on the front and rear towers make it easier to adapt the suspension to different tracks or track conditions.

Updated Motor and Center Diff PlacementThe motor mount and center differential are moved back 36mm to give the rear of the truck more traction while increasing corner speed.

Performance Battery Mounting SystemEngineers have eliminated the weight of the battery tray and replaced it with thin foam pads mounted directly to the chassis. They've also made the battery hold-down posts adjustable so you can shift the position of the battery forward or aft as needed.

Updated Diff CasesDrive inserts are now molded into the diff cases, and a reengineered seal system protects internal components. The result is a drivetrain that lasts longer and delivers more consistent performance.

Two Complete Wheel SetsTwo wheel sets are included so you can always have a spare set of tires mounted and ready to go. This is particularly handy if you want to try different compounds out as you adjust to track conditions.

Hi-Performance BodyThis proven body design delivers all the downforce you need for cornering fast and staying in control when flying down the straights. Air under the body is channeled through strategically placed outlets during jumps so the truck is more stable while airborne.

Guys, as all of you know, I am all about value. While you may think the price of this truck is a little high, let me assure you, it isnt. Here is a list of all thats included in this truck...I will place this on the first post as well...

One piece shock standoffs
Alum shock collars
Racing springs
Fr/Rr/Cnt HD lightened outdrives
Fr/Rr Aluminum adjustable pivot supports
HA Alum pivot ball set
Fr/Rr HA Alum shock bodies
Alum Clamping hexes
Serrated wheel nuts
Bleeder Shock Caps
Fr/Rr TiNi Shock Shafts
TiNi Hinge pin set

Newly updated parts(that used to be upgrades):
Fr/Rr Torque rods (these are a different length)
Fr/Rr Cabon Towers
HA Alum steering balls
HA 7075 Alum milled lightened chassis
Updated Diff cases
7075 Motor Adapter

Here is a good video to explain it all...
http://www.youtube.com/watch?v=WGvbkc3srho&safe=active

I also attached the latest setup...

Here is a setup guide for this specific truck...
http://www.tlracing.com/ProdInfo/Fil...uning_Tips.pdf

Here are build tips as well...
http://losiracing.blogspot.com/2013/...uild-tips.html
Attached Thumbnails
Official TLR TEN-SCTE 2.0 Kit Thread-scte-2-dunford-0211.jpg  
__________________
-Ryan Dunford
Horizon Hobby Spektrum Product Manager
TLR--Spektrum--Horizon Hobby--Tekin--Venom--Pro-Line--Sticky Kicks--Bradley FLD--ImagineIt Graphics--Casper-RC.com
TLR 22 3.0, TLR 22T 2.0, TLR 22SCT 2.0, TLR TEN-SCTE 2.0, TLR 8ight-E 4.0, DX6R

Last edited by hacker07; 02-26-2013 at 03:23 PM.
hacker07 is offline   Reply With Quote
Old 01-30-2013, 12:09 AM   #2
Tech Master
 
gijoe64's Avatar
 
Join Date: Apr 2003
Location: Corona, Ca
Posts: 1,433
Trader Rating: 30 (100%+)
Default

Quote:
Originally Posted by hacker07 View Post
Thats right folks, its finally here...the truck you've been waiting for. I will update this page as time goes on, but this will be a good start!


http://www.tlracing.com/Products/Def...rodId=TLR03000


Chassis Call-Out

1. 3mm HARD-ANODIZED, 7075 Machined-Aluminum Chassis Plate
2. Heavy-duty 4mm tie rods with captured ends
3. HARD-Anodized aluminum threaded shocks
4. Updated front and rear carbon fiber shock towers
5. Updated motor and center diff placement
6. Performance battery mounting system
7. Updated diff cases
8. Two complete wheel sets
9. 12mm aluminum wheel hexes
10. Hi-performance body
11. Ti-Nitride shock shafts and hinge pins
12. Hard-Anodized Aluminm, Adjustable pivots
13. Aluminum bleeder shock caps
14. ALUMINUM CHASSIS BRACES

Features


Lightweight, Anodized, Hard Aluminum Chassis

The chassis plate is machined from 3mm thick aluminum alloy and 7075 hard-anodizedfor durability. The parts layout on the chassis has been updated to shift the weight bias lower and farther back for more consistent handling and faster lap times.


Heavy-Duty 4mm Tie Rods with Captured Ends

The tie rods have been machined to handle the punishing impacts associated with short course racing. The captured rod ends prevent accidental disconnection.


Anodized, Aluminum-Threaded Shocks

The big-bore, 12mm aluminum shock bodies are hard-anodized to resist wear. They're equipped with threaded shock collars that make precise pre-load and ride height adjustments easy.


Updated Front and Rear Shock Towers

Both shock towers offer extensive camber adjustments. Extra shock mounting positions on the front and rear towers make it easier to adapt the suspension to different tracks or track conditions.


Updated Motor and Center Diff Placement

The motor mount and center differential are moved back 36mm to give the rear of the truck more traction while increasing corner speed.


Performance Battery Mounting System

Engineers have eliminated the weight of the battery tray and replaced it with thin foam pads mounted directly to the chassis. They've also made the battery hold-down posts adjustable so you can shift the position of the battery forward or aft as needed.


Updated Diff Cases

Drive inserts are now molded into the diff cases, and a reengineered seal system protects internal components. The result is a drivetrain that lasts longer and delivers more consistent performance.

Two Complete Wheel Sets

Two wheel sets are included so you can always have a spare set of tires mounted and ready to go. This is particularly handy if you want to try different compounds out as you adjust to track conditions.


Hi-Performance Body

This proven body design delivers all the downforce you need for cornering fast and staying in control when flying down the straights. Air under the body is channeled through strategically placed outlets during jumps so the truck is more stable while airborne.
How fast does it go
__________________
Raymon Robinson

ARC, LRP Go Blue!!
gijoe64 is offline   Reply With Quote
Old 01-30-2013, 12:17 AM   #3
Tech Elite
 
Join Date: May 2006
Posts: 3,527
Trader Rating: 13 (100%+)
Default

Here is a main chassis shot.
Attached Thumbnails
Official TLR TEN-SCTE 2.0 Kit Thread-tlr03000_a2.jpg  
__________________
-Ryan Dunford
Horizon Hobby Spektrum Product Manager
TLR--Spektrum--Horizon Hobby--Tekin--Venom--Pro-Line--Sticky Kicks--Bradley FLD--ImagineIt Graphics--Casper-RC.com
TLR 22 3.0, TLR 22T 2.0, TLR 22SCT 2.0, TLR TEN-SCTE 2.0, TLR 8ight-E 4.0, DX6R
hacker07 is offline   Reply With Quote
Old 01-30-2013, 12:21 AM   #4
Tech Adept
 
Join Date: Nov 2010
Posts: 165
Trader Rating: 2 (100%+)
Default

Ryan, how soon can we expect them in the stores?

Also, how will the weight compare to the 1.0? found it- 6.3lbs.

Last edited by Jedev; 01-30-2013 at 12:34 AM.
Jedev is offline   Reply With Quote
Old 01-30-2013, 12:28 AM   #5
Tech Fanatic
 
Join Date: Oct 2012
Posts: 782
Default

Whoah nice truck
rallyredevo is offline   Reply With Quote
Old 01-30-2013, 12:29 AM   #6
Tech Master
 
OMG23RC's Avatar
 
Join Date: Jun 2011
Location: Sydney Australia
Posts: 1,133
Trader Rating: 21 (100%+)
Default

looks good, pity 4wd act has died at our track.
__________________
www.sydneyrc.com - Sydney's best off road track.
Kyosho|Associated|Viper|Schuur Speed|Savox|Sanwa.
RB5 SP2 WC|Viper vtx10 B.E|Schuur Speed 17.5|Savox 1257tg|Sanwa MT-4
SC-R|Turnigy Trackstar Turbo|Reedy sonic 10.5|BMS-616DMG|Sanwa MT-4
B44.2|Viper vtx10r|Viper 8.5|Savox 1258tg|Sanwa MT-4

Last edited by OMG23RC; 02-22-2013 at 12:07 AM.
OMG23RC is offline   Reply With Quote
Old 01-30-2013, 12:30 AM   #7
Tech Addict
 
RC8daBOMB's Avatar
 
Join Date: Sep 2009
Location: Palm Desert
Posts: 637
Trader Rating: 11 (100%+)
Default

Looks very nice! Might get me one of these this year..
__________________
22SCT / Reedy Sonic 17.5 / Ace 1015
22 / Tekin 13.5 / Spektrum Low Profile
MBX6 (probably going to convert to 4x4 SC) / Something / Something else
RC8daBOMB is offline   Reply With Quote
Old 01-30-2013, 12:34 AM   #8
Tech Initiate
 
Join Date: Oct 2012
Location: NorCal
Posts: 32
Default

Whoa! Christmas in January!
is2scooby is offline   Reply With Quote
Old 01-30-2013, 12:36 AM   #9
Tech Master
 
BmainStar's Avatar
 
Join Date: Nov 2010
Location: pullin in,ca.
Posts: 1,812
Trader Rating: 1 (100%+)
Default

Nice work Ryan!!Bet its hard to keep a secret !!!!!
__________________
Toy Car Playerz
West Coast
BmainStar is offline   Reply With Quote
Old 01-30-2013, 12:39 AM   #10
Tech Rookie
 
kawshon's Avatar
 
Join Date: May 2005
Location: Hawaii
Posts: 14
Trader Rating: 2 (100%+)
Default

sweetness!!
__________________
Losi Ten-SCTE, Tekno SCT410, AE SC8.2E, Axial SCX-10
kawshon is offline   Reply With Quote
Old 01-30-2013, 12:44 AM   #11
Tech Master
 
KalEl63's Avatar
 
Join Date: Jun 2011
Location: 3rd Rock
Posts: 1,959
Trader Rating: 12 (100%+)
Default

I like it I am glad I held off putting the TLR stuff thru my 1.0…Now the dilemma starts
__________________
Team Associated RC10 B6D
Team Associated RC10 B64D
Team Associated RC10 T5M

1.21 GIGAWATTS!!!
KalEl63 is offline   Reply With Quote
Old 01-30-2013, 12:49 AM   #12
Tech Apprentice
 
Join Date: Apr 2010
Location: SoCal
Posts: 56
Default

Nice Truck.

I hope they release a SCTE V2 Tuning / Upgrade kit for those of us that have the orginal SCTE (I guess it's the SCTE 1.0 or SCTE V1 now )

BulldogSRT

Last edited by BulldogSRT; 01-30-2013 at 01:19 AM.
BulldogSRT is offline   Reply With Quote
Old 01-30-2013, 12:50 AM   #13
Tech Master
 
BmainStar's Avatar
 
Join Date: Nov 2010
Location: pullin in,ca.
Posts: 1,812
Trader Rating: 1 (100%+)
Default

Delivery shows Mid March...oooohhh...Plenty of time to sell a few things...
Looks good I think it will be a Killer!!!!And its a KIT!!!!!Ryan does really listen LOL
__________________
Toy Car Playerz
West Coast
BmainStar is offline   Reply With Quote
Old 01-30-2013, 12:54 AM   #14
Tech Master
 
Ridley's Avatar
 
Join Date: Dec 2008
Posts: 1,460
Trader Rating: 13 (100%+)
Default

Are the drive cups and cvd's made out of anything tougher than the last version? The drivetrain wear is what made me ditch version 1.
__________________
2011 Ohio RC Pro Series 4x4 SCT Champion
2012 SCT Nationals-1/5th scale SCT TQ and Champion.
2013 East Coast National Champion and TQ-1/5th scale 4x4 truck
2014 East Coast National Champion and TQ-1/5th scale off road 4x4 truck
Ridley is offline   Reply With Quote
Old 01-30-2013, 01:03 AM   #15
Tech Adept
 
NICEALLDAY's Avatar
 
Join Date: Jun 2011
Location: San diego
Posts: 127
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by Ridley View Post
Are the drive cups and cvd's made out of anything tougher than the last version? The drivetrain wear is what made me ditch version 1.
+1
__________________
AE FT RC8.2e |FT TC6.1| AE FT SC10.2 | AE B5 RM |

Home track: SDRC Raceway
NICEALLDAY is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 01:01 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net