MonsterSummit

iTrader: (15)

Near Columbus, OH. Me and a buddy came over to stateline a couple of weeks ago for "The Series" race. I TQ'ed and led the whole main until A traction roll in the sweeper after the back straight handed the win to my buddy. Ended up 2nd. Fun track, but man was it hard on tires. Especially on 1/8.

Casper

iTrader: (34)

You would need to find a painter or you can use the 22SCT RTC body

http://www.tlracing.com/Products/Def...odID=TLR230000

Sivaaji

Casper, Thanks but is this the same design as the new 2.0 body?

Grandturk

iTrader: (5)

It's the same design - the TLR high performance body

Why not check out the painting forum here and find a painted that will paint a body for you the way you like?

Edit - assuming you can find someone local to Sri Lanka of course. I'm sure you can find someone willing to ship but it might be cost prohibative

Sivaaji

Thanks GT

hacker07

iTrader: (13)

I use it as a practice body, it is great!

egobrkr

iTrader: (29)

I am still using the first stock setup with the #3 and #4 pistons but with 573 for diff oil. I did the 2mm spacer under the outside ball ,changed the toe like in the new setup sheet and moved the in camber linh down and out. The truck handled better but the steering did not feel right so I put the toe back out and that's when it came alive! I really like how it jumpes and turns now. I don't know if I will use the whole new setup or not. I was having some traction roll problem but I think it was my tire choice. Thanks for staying hard at it with the setup sheets hacker and casper.

P.S I still can't get around them tekno boys. Any magic voodoo you could send my way would be great! Lol

darkstar1974

iTrader: (34)

Where can I find the latest set up sheets??

maddog9

iTrader: (30)

http://www.casper-rc.com/TLR_Ten-SCTE.htm

mxgregg

iTrader: (32)

Ryan or Casper,

On Ryan's set up sheet for the rear suspension what component is the adjustment for the anti squat at 3?

egobrkr

iTrader: (29)

There are 2 hinge pin holders on the rear of the truck. The one that's on the front closest to the motor is the one for antisquat

mxgregg

iTrader: (32)

So that would be the front pivot point for the rear suspension A arms on the chassis under the rear diff?

egobrkr

iTrader: (29)

Yes

mxgregg

iTrader: (32)

Thanks!

Casper

iTrader: (34)

I believe the kit setup is 3 deg or antisquat and this has the inserts for the front of the rear arm with #1 inserts up.